Instruction/ maintenance manual of the product EX-ZR10 Casio
Go to page of 199
Digital Camera E User’s Guide To go to “Getting the Most Out of Dyn amic Photo” cl ick here! Thank you for purchasing this CASIO product. • Before using it, be sure to r ead the pr ecautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference.
2 As you unpack your camera, check to make sur e that all items shown below are included. If anything is missing, contact your original retailer. Unpacking Digital camera Rechargeable lithium ion batt.
3 • The contents of this manual, the bundled Quick Start Guide, and the bundled High Speed Continuous Shutter/High Speed Mo vie Shooting Guide are subject to change without notice. • The contents of this manual have been checked at each step of the production process.
4 Contents Contents Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Guide .
5 Contents ❚❙ Recording Movies 54 T o record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 ❚ Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Contents ❚ Configuring Power On Default Settings . . . . . . . . . . . . . . . . . . . . (Memory) . . . 93 Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quality) . . 94 ❚ S pecifying Snapsho t Image Quality .
7 Contents ❚❙ Dynamic Photo 121 Inserting a Built-in Subject into a Snapshot or Movie . . . (Dynamic Photo) . 121 ❚ T o view a Dynami c Photo . . . . . . . . . . . . . . . . . . . . . . (Dynamic Photo File) . . 123 Converting a Dynamic Photo Still Image to a Movie .
8 Contents Selecting the HDMI T erminal Output Method . . . . . . . . . . .(HDMI Output) . 159 Configuring a St ar tup Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . (St artup) . 159 Formatting Built-in Memory or a Memory Card . . . . .
9 The numbers in parentheses indicate t he pages w here each item is explained. . Camera General Guide 1 Zoom controller (pages 26, 42, 104) 2 Shutter button (page 25) 3 Flash (page 40) 4 [ON/OFF] (Po.
10 . Charger Unit cn cm co Bottom cm Battery/me mory card slots (pages 17, 21, 170, 172) cn Tripod hole Use this hole when attaching to a tripod. co Speaker 3 1 2 1 +7- Contacts 2 [CHARGE] Lamp 3 AC j.
11 The monitor screen uses various indicators , icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes.
12 . Movie Recording . Snapshot Viewing 1 Recording mode (page 54) 2 Audio recording disabled (page 57) 3 Remaining movie memory capacity (page 54) 4 Movie recording time (page 54) 5 Movie recording i.
13 . Movie Playback . CS Image Viewing 1 No audio data available 2 File type 3 Protect indicator (page 116) 4 Folder name/file name (page 148) 5 Movie recording time (page 97) 6 Movie quality/speed (p.
14 Quick Start Basics Quick Start Basics What is a digital camera? A digital camera stores images on a me mory card, so you can record and delete them a countless number of times. Play You can use the images you r ecord in a variety of d ifferent ways.
15 Quick Start Basics Your CASIO camera is packed with a powerful se lection of features and functions to make recording of digital images easier , in cluding the following fou r main functions.
16 Quick Start Basics Note that the battery of a newly p urchased camera is not charged. Pe rform the steps under “To charge the battery” to bring the battery to a full char ge. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-110) for power.
17 Quick Start Basics Other Charging Precautions • Use the special charger (BC-110L) to c harge the special lithium ion bat tery (NP- 110). Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident.
18 Quick Start Basics 3. Close the battery cover. Close the battery cover and then shift the slider towards LOCK. • For information about how to replace the battery, see page 170. Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below .
19 Quick Start Basics The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date a nd time correctly will cause the wrong date and time data to be recorded with images.
20 Quick Start Basics NO TE • Each country controls its local time offs et and the use of summer time, and so they are subject to change. • Removing the battery from the camera too soon afte r configuring time and date settings for the first time can cause the se ttings to be reset to their factory defaults.
21 Quick Start Basics 1. Press [ON/OFF] (Power) to turn off the camera and then open the battery cover. Slide the battery cover slider towards OPEN and then open it as indicated by the arrows in the illustration.
22 Quick Start Basics You need to format a new memory card befor e using it for the first time. 1. Turn on the camera and press [MENU]. 2. On the “Set Up” tab, s elect “Forma t” and t hen press [ 6 ]. 3. Use [ 8 ] and [ 2 ] to select “F ormat” and then press [SET].
23 Quick Start Basics • Take care to ensure that nothing is restricting or coming into contact with the lens as it extend s. Holding the lens with your hand so it cannot extend creates the risk of malfunction. •P r e s s i n g [ p ] (PLAY) while in the REC mode switches to the PLAY mode.
24 Quick Start Basics Your images will not come out clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration, and keep it still by pressing your arms firmly against your sides as you shoot.
25 Quick Start Basics You can select one of tw o auto recording mo des (Auto or Premium Auto) according to your digital imaging needs. 1. Press [ r ] (REC) to turn on the camera. The camera will enter the REC mode. 2. Use [AUTO] to select Auto recording mode.
26 Quick Start Basics 1. Point the camera a t the subject. If you are using Premium Auto, text will appear in the lower right corner of the monitor scr een describing the type of shot the camera has dete cted. • You can zoom the image, if you wan t.
27 Quick Start Basics . If the image does not focus... If the focus frame stays red and the back la mp is flash ing green, it means that the image is not in focus (because the subject is too close, etc.). Re-point the ca mera at the subject and try to focus again.
28 Quick Start Basics Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see p age 97. • For information about images reco rded using continuous shutter (CS) , see page 99.
29 Quick Start Basics If memory becomes full, you can delete s napshots and movies you no longer need in order to free up storage and r ecord more images. IMPORT ANT! • Remember that a file (image) delete operation cannot be undone. • For information about images reco rded using continuous shutter (CS) , see page 100.
30 Quick Start Basics 1. Press [ p ] (PLAY) to enter the PLAY mo de and then press [ 2 ] ( ). 2. Use [ 8 ] and [ 2 ] to select “Delete Files” and then press [SET]. • This displays a file selection screen. 3. Use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to move the selection bo undary to the file you want to del ete, and then press [S ET].
31 Quick Start Basics Operation • Never open the battery cover while the bac k lamp is flashing green. Doing so can result in the image you just shot being sa ved incorrectly, damage to other images stored in memory, malfunction of the camer a, etc.
32 Quick Start Basics • Any of the following can make proper focus impossible. – Solid color wall or other very low contrast subject – Strongly back lit subject – Ver y shiny subject – Blind.
33 Snapshot Tutorial Snapshot Tutorial 2. Use [ 8 ] and [ 2 ] to select the setting you want to change. This will select one of the contro l panel icons and display its settings. * 1 3. Use [ 4 ] and [ 6 ] to change the setting. 4. If you wan t to configur e anothe r s etting, repeat steps 2 and 3.
34 Snapshot Tutorial NO TE • No icon is displayed for any Control Panel option (p age 11) that is set to its initial default (reset) setting. An icon will appear only if you change the setting of the corresponding Control Panel option. The foll ow ing are the initial defaults for Control Panel options.
35 Snapshot Tutorial Image Size Selection Tips Note that larger images have mo re pixels , so they take up more memory space. • For information about image size, image quality, and number of images that can be stored, see page 185. • For information about movie image size, see page 94.
36 Snapshot Tutorial • The initial factory default image size setting is 12M (12 million pixels). • Selecting “3:2” records images with an aspect ratio of 3:2, wh ich matches the standard aspect ratio of print paper. • The letters “HDTV” stand for “High Defi nition Television”.
37 Snapshot Tutorial ISO sensitivity is a measur e of sensitivity to light. 1. In the REC mo de, press [SET]. 2. Use [ 8 ] and [ 2 ] to select the sec ond control pa nel option from t he top (ISO Sensiti vity). 3. Use [ 4 ] and [ 6 ] to select the setting you want and then press [SET].
38 Snapshot Tutorial You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.
39 Snapshot Tutorial You can manually adjust an image’s exp osure value (EV value) before shooting it. • Exposure Compensation Range: –2.0 EV to +2.0 EV • Unit: 1/3EV 1. In the REC mo de, press [SET]. 2. Use [ 8 ] and [ 2 ] to select the fourth control panel option from the top (EV Shift).
40 Snapshot Tutorial 1. In the REC m ode, pr ess [ 2 ] ( ) once. 2. Use [ 4 ] and [ 6 ] to select the flash setting you want and then press [SET]. 3. Press the shutter bu tton to shoot.
41 Snapshot Tutorial NO TE • Take care so your fing ers and the strap do not block the flash. • The desired effect may not be obtained when the subject is too far away or too close. • Flash charging time (page 189) depends on oper ating conditions (battery condition, ambient temperature, etc.
42 Snapshot Tutorial Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single SR Zoom, Multi SR Zoom, and digital zoom. The maximum zoom factor depends on the image size setting and the digital zoom on/off settings. 1. In the REC m ode, slid e the zoom c ontroller to zoom.
43 Snapshot Tutorial During a zoom operation, a zoom bar ap pears on the monitor screen to show the current zoom setting. Interpreting the Zo om Bar Range where ima ge deteri oration is su ppressed. (optical zo om, HD Zoom, Single SR Zoom, Multi SR Zoom) 1X 28.
44 Snapshot Tutorial . Zoom Icon The appearance of the zoom icon on the m onito r screen depends on the zoom factor. . Zoom Factor The digital zoom factor depends on the image size (page 34), the super r esolution zoom setting, and on whether or not the “Multi SR Zoom” HS BEST SHOT scene is selected (page 72).
45 Snapshot Tutorial There are two types of Super Resolution Zoom: Single SR Zoom and Multi SR Zoom. Single SR Zoom uses super resolution to expand the zoom range in which image quality deterioration is minimi zed.
46 Snapshot Tutorial To shoot with Continuous Shutter, press Õ (Continuous Shutter) and then select the “High Speed CS” scene. Note that the “High Speed CS” HS BEST SHOT scene has two modes: a High Speed CS mode and an F CS m ode. NO TE • To return from the “High Speed CS” HS BEST SHOT scene to th e Single Shot mode, press [AUTO].
47 Snapshot Tutorial • You can specify 5, 10, 20, or 30 as the maximum number of shots for each continuous shutter operation. • You can specify anywhere from 0.
48 Snapshot Tutorial 1. In the REC m ode, pr ess Õ (Conti nuous Shutter). 2. Use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to select “High Speed CS” and then press [SET]. • This will display Š (High Speed CS). 3. Press [SET]. 4. Use [ 8 ] and [ 2 ] to select the fifth Control Pa nel option from the top (CS mode).
49 Snapshot Tutorial 11. Use [ 4 ] and [ 6 ] to specify how many of the 30 images and for how long imag es sho uld be p re-record ed in the b uffer. • Prerecord CS shooting is not performed when the number of buffer images and the recording time are both zero.
50 Snapshot Tutorial NO TE • Note the following when selecting a High Speed CS speed (fps) setting. – Use a higher High Speed CS speed (fps) setting when shooting a fast-moving subject. – Use a slower High Speed CS speed (fps) setting when shooting a slower-moving subject.
51 Snapshot Tutorial Due to the characteristics of the CM OS imaging element, shooting fast-moving subjects with High Speed CS may cause t he subject to become distorted.
52 Snapshot Tutorial 11. Press the shutter button th e rest of the way down. Images continue to be shot as long as you keep the shutter button d epressed. 12. Image recording will stop when you release the shutter button or after the maximum number of shots is reached.
53 Snapshot Tutorial • When shooting CS images, the snapshot image quality automatically changes to “Normal”. • If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated o n the monitor screen.
54 Recording Movies Recording Movies The following procedure explains h ow to record a standard (STD) movie. See the pages indicated below for more infor mation about movies. High-definition movie (FHD movie): page 57 High speed movie (HS movie): page 57 1.
55 Recording Movies Shooting wi th BEST SHOT With BEST SHOT (page 63), you can select the sample scene that matches the type of movie you are trying to shoot and th e camera will change it s setup accordingly, for beautiful movies every time.
56 Recording Movies IMPORT ANT! • Spending a long time using movie record in g will cause the camera to become slightly warm to the touch. This is normal and does n ot indicate malfunction. • Shooting movies for long periods in areas where temperature is relatively high can cause digital noise (dots of light) to appear in the movie image.
57 Recording Movies This camera supports recording of high-def inition (FHD) movies. The aspect r atio of an FHD movie is 16:9, the image size is 1920 x 1080 pixels, and the frame rate is 30 fps. Image quality and image size settings cannot be changed.
58 Recording Movies 5. Record the movie the same way as you would a normal movie (page 54). Press [ 0 ] (Movie) to start and stop recording. • During High Speed Movie recording, focus is fixed at the position where it was when recording started.
59 Recording Movies With this feature, the camera pre-recor d s up to five seconds of whatever is happening in front of the lens in a buffer t hat is continually updated. Pressing [ 0 ] (Mov ie) saves the pre-recorded action (buffer contents) followed b y real-time recording.
60 Recording Movies . To shoot a Prerecord Movie 1. After using the above procedure to set up the camera for Prerecord Movie, point the camera at the subject.
61 Recording Movies The “For YouTube” scene recor ds movies in a format that is optimal for uploading to the YouTube movie site, which is operated b y YouTube, LLC. “For YouTube” can be used when shooting a standard (STD) movie, a high-definition (FHD) movie, or a high speed (HS) movie.
62 Recording Movies You can shoot snapshots while movie recording is in progress. When the camera is in the Single Shot mode, you can shoot snapshots one-by-one. In the CS mode, holding down the shutter button will record up to seven consecutive imag es at a speed of approximately 10 images per second (fps).
63 Using BEST SHOT Using BEST SHOT BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change th e setup of the camera, simply find the scene that matches wh at you are trying to achieve, and the camera sets up for it automatically.
64 Using BEST SHOT 3. Use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to move the boundary to the scene you want to select. • The scene menu has multiple pages. Use [ 8 ] and [ 2 ] to scroll between menu pages. • You can access information about the curr ently selected scene.
65 Using BEST SHOT 3. Press [SET] to configure the camera with the settings for the currently selected scene. This returns to the REC mode. • The settings of the scene you selected remain in effect until you select a different scene. • To select a different BEST SHOT scene, repeat the above procedu re from step 1.
66 Using BEST SHOT . BEST SHOT Precautio ns • BEST SHOT scene images were not shot using this camera. • Images shot using a BEST SHOT scene may not produce the results you expected due to shooting conditions and other factors. • You can modify the camera settings that are configured after you select a BEST SHOT scene.
67 Using BEST SHOT You can save up to 999 camer a setups as user BEST SHOT scenes for instant recall whenever you need them. 1. In the Sing le Shot mode, s elect the “BEST SHOT (Register User Scene)” BEST SHOT scene. 2. Use [ 4 ] and [ 6 ] to select the snapshot wh ose setup you want to save.
68 Using BEST SHOT With High Speed Night Scene and High Speed Night Scene and Portrait, the camera detects automatically whether it is bei ng hand-held or on a tripod.
69 Using BEST SHOT When you press the shutter button while High Speed Anti Shake is enabled , the camera records multiple images and automat ically co mbines them in a way that produces a final image with minimal blur.
70 Using BEST SHOT With HDR (High Dynamic Range), the camera shoots a series of CS images using different exposure settings and combines t hem into a final ima ge to correct for overexposure or underexposure of subjec ts of different brightness le vels.
71 Using BEST SHOT This feature applies HDR (High D ynamic Range, page 70) photography to transform snapshots into works of art that prov ide a greater degree of expression than conventional photography. 1. In the REC m ode, pr ess Õ (Conti nuous Shut ter).
72 Using BEST SHOT This feature uses super resolution technol ogy and multiple Continuous Shutter (CS) images to expand the zoom range for over all images of higher quality and clarity. 1. In the REC m ode, pr ess Õ (Conti nuous Shut ter). 2. Select “Multi SR Zoom ” and then press [SET].
73 Using BEST SHOT With Slide Panorama, you move the camera to compose and record multiple images, which are then combined to a panorama. This feature lets you shoot a panoram a of up to 360 degrees, which is dramatical ly greater than the physical capabilities of the lens.
74 Using BEST SHOT NO TE • The following conditions are not compatible with Slide Panorama shooting. – Subject whose brightness is very differ ent from that of its surroundings due to artificial ligh t, sunlight, etc.
75 Using BEST SHOT There always is some unavoidable time lag between the po int you press the shutter button and the point that the image is actual ly recorded. T he “Lag Correction” feature lets you configure the camera to lessen or e ven eliminate this lag to help you better time your shots and get exactly the mom ent you want.
76 Using BEST SHOT 6. Use [ 4 ] and [ 6 ] to scroll t hrough the pr e-recorded images on the monitor screen. Use [ 4 ] and [ 6 ] to scroll through the pre-recor ded images. Each image appears, along with an indication of the timing when it was pre-recorded.
77 Using BEST SHOT With High Speed Best Selection, the camera automatically shoots a series of images, and selects the best one based on facial image blur, and facial expression ( whether the subject is smiling or blinking). 1. In the REC m ode, pr ess Õ (Conti nuous Shut ter).
78 Using BEST SHOT The High Speed CS capabilities provide you with a variety of BEST SHOT options to suite exactly the type of im age you are trying to record. Images continue to be shot a s long as you keep the shutter button depre ssed, with the shooting speed optimized according to the BEST SHOT scene you are usin g.
79 Using BEST SHOT 5. Shooting will stop when you rel ease the shutter button or after the maximum number of shots is reached. NO TE • When shooting with these BEST SHOT sc enes, the camera’s curr.
80 Using BEST SHOT The High Speed Movie capabilities of the ca mera provide you with a variety of BEST SHOT options to suite exactly the type of image you are trying to record. 1. In the REC m ode, pr ess Õ (Conti nuous Shut ter). 2. Select the BEST SHOT scene you want to use and then pre ss [SET].
81 Advanced Settings Advanced Settings The following are menu op erations you can use to configur e various camera settings. . Example Menu Screen Operation 1. In the REC mode , press [MENU]. This will display the menu screen. • Menu contents are different in th e REC mode and PLAY mode.
82 Advanced Settings . Menu Operations in This Manual Menu operations are represen ted in this manual as shown below. T he following operation is the same as the one described un der “Example Menu Screen Operation” on page 81. Procedure [ r ] (REC) * [MEN U] * REC Tab * Self-timer Use [ 4 ] and [ 6 ] to select the “REC” t ab.
83 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Zoom (SR) See page 45 for details. Procedure [ r ] (REC) * [MENU] * REC Tab * Focus *1 The focus ran ge is the dis tance from th e lens surf ace. *2 The focus ran ge depends on the current op tical zoo m position.
84 Advanced Settings To focus with manual focus 1. On the monitor screen, compose the image so the subject you want to focus on is within the yellow boundar y.
85 Advanced Settings Using Focus Lock “Focus lock” is a technique y ou can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen. • To use focus l ock, select “ Í Spot” or “ Ë Tracking” for the Auto Focus area (page 88).
86 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Self-timer With the Self-timer, pressing the shutter butto n starts a timer. The shutter is released and the image is shot after a fixed amount of time. • The front lamp flashes while the Self-timer countdown is in progress.
87 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Anti Shake You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a movin g subject using telephoto, when shooting a fast-moving subject, or w hen shooting under dim lighting conditions.
88 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * AF Area You can use the following procedure to change th e Auto Focus metering area for shooting snapshots. • When recording movies, the AF metering area is always “ Í Spot”. •“ Ë Tracking” cannot be used in combinat ion with the following features.
89 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * AF Assist Light Half-pressing the shutter butto n while this setting is selected causes the front lamp to light, which provides illumination for focusing in areas where lighting is dim. Leaving this function turned off is recommended when shooting portraits fr om short distances, etc.
90 Advanced Settings Tips for Best Face Detection Results • The camera performs center focus if it cannot d etect a face. • Always make sure that Auto Focus (AF) is selected as the focu s mode when shooting with face detection. • Detection of the following ty pes of faces is not supported.
91 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Digital Zoom Select “On” when you want to use digital zoom (page 43). • Digital zoom is disabled while s hooting with the following featur e.
92 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Grid The on-screen grid can be displayed on the REC mode monitor screen for ea sy vert ical and horizontal alignment when composing images.
93 Advanced Settings Procedure [ r ] (REC) * [MENU] * REC Tab * Memory This setting lets you specify which came ra setting s should be remembered by the camera when it is turned off, and restored the next time the camera is turned on. To have the camera remember a setting, y ou should enable the setting’s memory.
94 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * T Quality (Snapshot) • The “Fine” setting h elps to bring out det ails when shooting dense tree branches or leaves, a complex pattern, etc. • Memory capacity (the number of images you can reco rd) will be affected by the quality settings you configure (page 185).
95 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * Metering The metering mode determines what part of t he subject is metered for exposure. Procedure [ r ] (REC) * [MENU] * Quality Tab * Lighting You can use this setting to optimize th e balance between bright areas an d dark areas when shooting images.
96 Advanced Settings Procedure [ r ] (REC) * [MENU] * Quality Tab * Flash Inte nsity You can specify flash intensity to one of five levels from +2 (br ightest flash) to –2 (least bright flash). • Flash intensity may not change when the subject is too far away o r too close.
97 Viewing Snapshots and Movies Viewing Snapshots and Movies See page 28 for the procedure for viewing snapshots. 1. Press [ p ] (PLAY) and th en use [ 4 ] and [ 6 ] to display the movie you want to view. 2. Press [SET] to start playback. Movie Playback Controls • Playback may not be possible for movies not recorded with this camera.
98 Viewing Snapshots and Movies 1. Press [ p ] (PLAY), and then use [ 4 ] and [ 6 ] to display the panorama images you want to view. 2. Press [SET] to start playback of the panorama. Panorama playback causes the image to scroll left, right, up, or down.
99 Viewing Snapshots and Movies Each time you perform a continuous shutter (CS) operation, the camera creates a CS group that includes all of the images for th at particular CS session. You can use the following procedure to play back the images in a particular CS group.
100 Viewing Snapshots and Movies The following are operations that ar e supported after yo u press [SET] to start image playback. You can use the following procedu res to del ete images while playback is in progress or paused. . Deleting a Specific CS Gro up File 1.
101 Viewing Snapshots and Movies . Deleting Multiple Fil es in a CS Group 1. While CS image playback is in progre ss or paused (toggle b y pressing [SET]), press [ 2 ]. This will display the “CS Frame Edit” menu. 2. Use [ 8 ] and [ 2 ] to select “Delete” and then press [SET].
102 Viewing Snapshots and Movies Use the following to divide up a CS Group into individual images. . Dividing Up a Specific CS Gro up 1. While a CS group is di splayed or while the images of a CS group are scrolling on the monitor screen, press [MENU].
103 Viewing Snapshots and Movies Use the following procedure to copy an image in a CS group to a location outside of the group. 1. While CS image playback is in progre ss or paused (toggle b y pressing [SET]), press [ 2 ]. This will display the “CS Frame Edit” menu.
104 Viewing Snapshots and Movies 1. In the PLAY mode, use [ 4 ] and [ 6 ] to scroll through the imag es until the one you want is dis played. 2. Slide the zoom co ntroller towards z ( [ ) to zoom. You can use [ 8 ], [ 2 ], [ 4 ], and [ 6 ] to scroll the zoomed image on the monitor screen.
105 Viewing Snapshots and Movies 1. Use the AV cable t hat comes with th e camera to connect it to the TV. • Make sure that you insert the cable connector into the USB/AV port un til you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.
106 Viewing Snapshots and Movies 3. Press [ p ] (PLAY) to turn on the camera. This will cause an image to appear on the TV screen, w ithout anything appearing on the camera’s monitor screen. • Pressing [ON/OFF] (Power) or [ r ] (REC) will not turn on the camer a while the AV cable is connected.
107 Viewing Snapshots and Movies Use a commerciall y available HDMI cable to connect the camera to the T V. For information about playback, see the procedure starti ng from step 2 under “Viewing Sn apshots and Movies on a TV Screen” on page 105. • Use a commercially available HDMI cable th at is marked with the logo shown to the right.
108 Viewing Snapshots and Movies . Selecting the HDMI Te rminal Ou tput Method (HDMI Output) Procedure [MENU] * Set Up Tab * HDMI Output Use this setting to select the digit al signal format when conn ecting to a TV with an HDMI cable. * 1080i corre sponds to 10 80 60i, but not 1080 50i .
109 Other Playback Functions (PLAY) Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. Procedure [ p ] (PLAY) * [MENU] * PLAY Tab * Slideshow For information about menu operations, see page 81 .
110 Other Playback Functions (PLAY) • To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the slideshow and returns to the menu screen. • Adjust audio volume by pressing [ 2 ] and then pr ess [ 8 ] or [ 2 ] during playback. • All button operations are disabled while the slideshow is transitioning from on e image to another.
111 Other Playback Functions (PLAY) You can replace the built-in slideshow back ground music with other music from your computer. Supported File Types: • PCM format (16-bit, monaural / stereo) WAV files • Sampling Frequencies: 11.025 kHz/22.05 kHz/44.
112 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Movie Screen * [MENU] * PLAY Tab * MOTION PRINT 1. Use [ 4 ] and [ 6 ] to scroll through the movie frames and display the one you want to use as the image of the MOTION PRINT image. Holding down [ 4 ] or [ 6 ] scrolls at high speed.
113 Other Playback Functions (PLAY) 3. Press [ 2 ] to display the editing menu and specify one or two cut points. 4. Use [ 8 ] and [ 2 ] to select “Yes” an d then press [SET]. The selected cut operation will take cons iderable time to complete. Don’t try to perform any camera operation until the “Busy.
114 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting You can use this setting to optimize th e balance between bright areas an d dark areas in existing images. NO TE • Correcting the lighting when shooting produces better results (page 95).
115 Other Playback Functions (PLAY) NO TE • You also can adjust the white balan ce when recording images (page 38). • The original snapshot is retained in memory and not deleted.
116 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * [MENU] * PLAY Tab * Protect IMPORT ANT! • Note that even if a file is protected, it will be deleted if you perform the format operation (page 160). NO TE • Performing the above procedure while a CS gr oup is displayed will protect all the images in the CS group.
117 Other Playback Functions (PLAY) 4. Use [ 8 ] and [ 2 ] to select “On” and then press [SE T]. This will protect the image and display the › icon. • To unprotect an image, select “Off” in step 4 an d then press [SET]. 5. After you are finished, select “Cancel ” and then press [SET] to exit this operation.
118 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotati on 1. Use [ 8 ] and [ 2 ] to select “Rotation ” and then press [SET]. Each press of [SET] will rotate the displayed image 90 degrees left. 2.
119 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming You can crop a snapshot to trim parts you do not need, and save the result in a separate file.
120 Other Playback Functions (PLAY) Procedure [ p ] (PLAY) * [MENU] * PLAY Tab * Divide Group See page 102 for details. Procedure [ p ] (PLAY) * Display CS group. * [MENU] * PLAY Tab * CS Multi Prin t 1. Use [ 8 ] and [ 2 ] to select “Create”. • You can use [ 4 ] and [ 6 ] to select a differ ent CS group, if you want.
121 Dynamic Photo Dynamic Photo This camera comes with a number of subjects in built-in memory (“built-in subjects”), which you can insert into snapshots and movies to create Dynamic Photo images. • The term “built-in subjects” refers to the moving figure s and characters that came pre-programmed in the camera’s built-in memory.
122 Dynamic Photo 3. If you are inserting a subject into a movie an image will appear on the monitor screen showing the approximate location of the subject i n the movie. Use [ 4 ] and [ 6 ] to shift the location to the positi on you want. After you are finished, press [SET].
123 Dynamic Photo 1. Press [ p ] (PLAY) and th en use [ 4 ] and [ 6 ] to display the Dynamic Photo you want to view. 2. If you want to see the subje ct in the Dynamic Photo movie, press [SET].
124 Printing Printing • You can specify which images you want to print, the nu mber of copies, and date stamp settings before printing (page 127). You can connect the camera directly to a printer that suppor ts PictBridge and print images without going through a computer.
125 Printing . Connecting th e Came ra to a Printer Use the USB cable that comes bund led with the camera to connect the camera to your printer’s USB port. • The camera does not draw power over t he USB cable. Check the battery le vel before connecting and make sure it is not too low.
126 Printing . To print 1. Turn on the prin ter and load paper. 2. Turn on the camera. This will display the print menu screen. 3. Use [ 8 ] and [ 2 ] to select “Paper Size”, and the n press [ 6 ]. 4. Use [ 8 ] and [ 2 ] to select a paper si ze and then press [SET].
127 Printing . Digital Print O rder Format ( DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images.
128 Printing . Configuri ng the Sam e DPOF Settings for All the Images Procedure [ p ] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printin g * All ima ges 1. Use [ 8 ] and [ 2 ] to specify the number of copies. You can specify a value up to 99.
129 Printing . To configure the same DPOF settings for all the imag es in a CS group 1. While CS image playback is in progre ss or paused (toggle b y pressing [SET]), press [ 2 ]. This will display the “CS Frame Edit” menu. 2. Use [ 8 ] and [ 2 ] to select “DPOF Printi ng” and then press [SET].
130 Printing DPOF settings are not cleared automati cally af ter printing is complete. The next DPOF print operation you execute will be performed using the last DPOF settings you configured for the images. T o clear DPOF settings, specify “00” for the number of copies of all images.
131 Printing . Standards Supported by the Camera • PictBridge This is a standard of the Camera and Imaging Products Association (CIPA). You can connect the camera directly t o a printer that suppo rts PictBridge, and perform image selection and printing using the camera monitor screen and controls.
132 Using the Camera with a Computer Using the Camera with a Computer You can perform the operations described below while the camera is conne cted to a computer. * Windows only The procedures you need to per form when us ing the camera with your computer and when using the bundled software are different for Windows and the Macintosh.
133 Using the Camera with a Computer Install the required software in acco rdance with the version of Windows you are running and what you want to do. * YouTube Uploa der for CASIO an d Photo Trans port will no t run under 64- bit versions of Windows OS.
134 Using the Camera with a Computer . Computer System Requiremen ts for Bundled Software Computer system requiremen ts are different for each of the applications.
135 Using the Camera with a Computer 4. Turn off the camera and then use th e USB cable that c omes with the camera to connect it to your computer. • The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.
136 Using the Camera with a Computer 10. Windows 7 / Window s Vista user s: Click “Start” and then “Documents”. Windows XP users: Click “Sta rt” and then “My Documents”.
137 Using the Camera with a Computer . To view images you copied to your computer 1. Double-click the copied “DCIM” folder to open i t. 2. Double-click the folder that contai ns the image s you want to view. 3. Double-click the image file you want to view.
138 Using the Camera with a Computer To play back a movie, first copy it to you r computer and then double-click the movie file. Some operating systems may not be able to pla y back movies. If this happens, you need to install separately available softwar e.
139 Using the Camera with a Computer Installing YouTube Uploader for C ASIO from the CD-ROM that comes with your camera simplifies uploading of movie fi le s you recorded with the “For YouTube” scene to YouTube.
140 Using the Camera with a Computer 7. When everything is ready, click the [Upload] butto n. This will upload the movie file(s) to YouTube. • After uploading is complete, click the [Exit] button to exit the application.
141 Using the Camera with a Computer . To transfer compu ter screen captures to the camera 1. Connect the camera to yo ur computer (page 134). 2. On your computer, clic k the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport.
142 Using the Camera with a Computer 1. Start up your computer, and plac e the bundled CD-RO M in to its CD- ROM drive. Normally, this should cause the menu screen to appear automatically. If your computer does not display the menu scre en automatically, navigate to the CD- ROM on your computer and then doubl e-click the “AutoMenu.
143 Using the Camera with a Computer Install the required software in acco rdance with what version of the Macintosh OS you are running and what you want to do. IMPORT ANT! • The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X 10.
144 Using the Camera with a Computer 4. Turn off the camera and then use th e USB cable that c omes with the camera to connect it to your Macintosh. • The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.
145 Using the Camera with a Computer 8. After the copy operation i s complete, drag the drive icon to Trash . 9. On the camera, press [ON/OFF] (Pow er) to tur n off the camera. After making sure that the gr een back lamp is unli t, disconnect the camera from the computer.
146 Using the Camera with a Computer If you are running Mac OS X, you can ma nage snapshots using iPhoto, which comes bundled with some Macintosh products. If you are running Mac OS 9, you will need to use commercially available software. You can use QuickTime, which comes bundled with your opera ti ng system, to play back movies on a Macintosh.
147 Using the Camera with a Computer You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file. If you don’t, g o to the Adobe Systems Incorporated website and install Acrob at Reader. 1.
148 Using the Camera with a Computer The camera creates a file each time you shoo t a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name.
149 Using the Camera with a Computer The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF The following operations are supported fo r DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these oper ations.
150 Using the Camera with a Computer . Supported Imag e Files • Image files shot with this camera • DCF-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera , it may take a long time for the image to appear on this camera’s monitor screen.
151 Other Settings (Set Up) Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode.
152 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Sounds • Setting a volume level of 0 mutes output. Procedure [MENU] * Set Up Tab * File No. Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 148).
153 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Create Folder • Images recorded with the BEST SHOT “For eBay” or “Auction” scene, and the “For YouTube” scene are stored in special folders. They are not stored in the folder you create here.
154 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. • Once date and time information is stamped into a sn apshot, it cannot be edited or deleted.
155 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Adjust When the date and time settings are what you want, select “ Apply” and then press [SET] to apply them. • You can specify a date from 2001 to 2049. • Be sure to select your Home City (p age 153) before setting the time and date.
156 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Language . Specify the disp lay language you wa nt. 1 Select the tab on the right. 2 Select “Language”. 3 Select the language you want. • Camera models sold in certain geographic areas may not support display language selection.
157 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Auto Power Off Auto Power Off turns off the camera whenever no camer a operation is performed for a preset amount of time. Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in the PLAY mode.
158 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device.
159 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * HDMI Output • See page 108 for details. Procedure [MENU] * Set Up Tab * Startup Display the image you want to use as yo ur startup image and then select “On”. • The startup image does not appear when you turn on the camera by pressing [ p ] (PLAY).
160 Other Settings (Set Up) Procedure [MENU] * Set Up Tab * Format If a memory card is load ed in the camera, this operation will for mat the memory card. It will format built-in memory if no memory card is loaded. • The format operation will delete all conten ts on the memor y card or in built-in memory.
161 Configuring Monitor Scre en Settings Configuring Monitor Screen Settings Each press of [ 8 ] (DISP) will cycle through display settings that display or hide on- screen information and the contr ol panel. You can configure separate settings for the REC mode and PLAY mode.
162 Configuring Monitor Scre en Settings A histogram is a graph that represents the lightness of an image in terms of the number of pixels. The vertical axis indica tes the number of pixels, while the horizontal axis indicates lightness.
163 Appendix Appendix . Avoid Use While In Motio n • Never use the camera to record or pl ay back images while operating an automobile or other vehicle, or while walking. Lookin g at the monitor while in motion creates the risk of serious accident. .
164 Appendix . Smoke, abnormal odor, overheati ng, and other abn ormalities • Continued use of the camera while it is emitting smoke or strange odor, or while it is overheating creates the risk of fire and elect ric shock. Immediately perform the following steps whenever any of the abo ve symptoms are present.
165 Appendix . Locations To Be Avoi ded • Never leave the camera in any of the following type s of locations. Doing so creates the risk of fire and electric shock.
166 Appendix • Do not use or leave the battery under dire ct sunlight, in an automobile parked in the sun, or in any other area sub ject to high temperatures. Doing so can damage the battery, and cause deterioration of its perfo rmance and loss of service life.
167 Appendix . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory.
168 Appendix . Caring for your camera • Never touch the lens or flash window wi th yo ur fingers. Finger smudges, dir t, and other foreign matter on the lens or flash window ca n interfere with proper operation of the camera.
169 Appendix . Other Precaution s The camera becomes slightly warm dur ing use. This is normal and does not indica te malfunction. . Copyrights Except for your own personal enjoyment, unau thorized us.
170 Appendix Any and all unauthorized commercial copying, distribution, and copying of the bundled software over a networ k are prohibited. This product’s YouTube upload functionality is included under license from YouT ube, LLC.
171 Appendix . Precautions during Use • Operation provided by a battery under cold conditions is always less than operation under normal temperatures. This is due to t he characteristics of the battery, not the camera. • Charge the battery in an area where the temper ature is within the range of 5°C to 35°C (41°F to 95°F).
172 Appendix See page 20 for information about supported memory car ds and how to load a memory card. Press the memory card an d then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one.
173 Appendix . Discarding or Tr ansferring Ownershi p of a Memory Card or the Camera The format and delete functions of the camera do not actually delete files from the memory card. The original data remains on the card. Note that responsibility fo r the data on a memory card lies with you.
174 Appendix Computer system requiremen ts are different for each of the applications. Be sure t o check the requirements for the particular a ppl ication you are trying to use. Note that the values provided here are minimum r equirements f or running each application .
175 Appendix The tables in this section show the initia l default settings that are configured for menu items (displayed when you press [MENU]) af ter you reset the camera (page 160). Menu items depend on whet her the camera is in the REC mode or PLAY mode.
176 Appendix “Quality” Tab “Set Up” Tab Quality (Snapshots) Normal Quality (Movies) FHD Metering B Multi Lighting On T » Flash Intensity 0 Color Filter Off Sharpness 0 Saturation 0 Contrast 0 Screen Auto Auto Rotate On Sounds Startup: Sound 1 / Half Shutter: Sound 1 / Shutter: Sound 1 / Operation: Sound 1 / = Operation: .
177 Appendix . PLAY Mode “PLAY” Tab “Set Up” Tab • The contents of the “Set Up” tab are the same in the REC mode and PLAY mode. Slideshow Images: All images / Time: 30 min / Interval: 3 .
178 Appendix When things don’t go rig ht... Troubleshooting Problem Poss ible Cause an d Recommended Act ion Power Supply Power does not turn on. 1) The battery may not be load ed correctl y (page 17). 2) The battery may b e dead. Char ge the batt ery (page 16) .
179 Appendix The subject is out of focus in the recorded i mage. The image may not be focused pro perly. When co mposing the image, make sur e the subjec t is located in side the fo cus frame. The flash does not fire. 1) If ? (Flash Off) is se lected as the flash mode, ch ange to another m ode (page 40).
180 Appendix A recorde d image was not saved. 1) Camera power may have been tu rned off befor e the save operation was co mplete, which will resu lt in the image not being save d. If the ba ttery indicato r shows , charge the battery as soon as poss ible (page 18).
181 Appendix Playback The color of the playback i mage is different fr om what appears on th e monitor scr een when shooti ng. Sunlight o r light from an other source may be shini ng directly into the len s when you are shootin g. Position th e camera so sunlight do es not shin e directly into the lens.
182 Appendix Language sel ection screen appea rs when the camera is turned on. 1) Y ou did not co nfigure ini tial sett ings after pu rchasing the camera or th e camera may h ave been left with a dead battery. Configure the correc t settings ( pages 19, 15 6).
183 Appendix Display Messages ALERT The camera’s protection function may have activated because camera temperature is too high. Turn off the camera and wait until it cools down before tr ying to use it again. Battery is low. Battery power is low. Cannot find th e file.
184 Appendix Memory Full Memory is full with images you recorded and/or files saved by editing operations. When sho oting with Prerecord CS, this message indicates that there is not enough memory capacity to record all of the pre-reco rded images. Delete files you no longer need (page 29).
185 Appendix Snapshot Number of Snapshots/Movie Rec ording Time Image Size (Pixels) Image Quali ty Approximate Image F ile Size Built-in Memory (Approx. 62.1MB *1 ) Snapshot Recording Capacit y SD Memory Card (1GB *2 ) Snapshot Recording Capacity 12M (4000 x 3000) Fine 7.
186 Appendix Movies Movie Mode Image Qualit y (Pixels) / (Audio) Maximum File Size Approximate Data Rate (Frame Rate) Built-in Memory (Approx. 62.1MB *1 ) Movie Recording Capacity SD Memory Card (1GB *2 ) Movie Recording Capacity File Size of 1-minute Movie FHD/ STD FHD (1920 x 1080) (Stereo) Maximum Movie Size: 4G B 14.
187 Appendix *1 Built-in memory capacity after formatting *2 The above valu es are based on use of a PRO HIGH SPEED SD memory card (Panasonic Corporati on). The number of images yo u can save depe nds on the type of memory card you are us ing. *3 Recordable time when the en tire movie i s recorded at 30 fps.
188 Appendix Specifi cations File Forma t Snapshots: JPEG (Exif Version 2 .3; DCF 2. 0 standard ; DPOF co mpliant) Movies: MOV format, H. 264/AVC standar d, IMA-ADPCM (ste reo) Recordin g Media Built-in Me mory (Image Stora ge Area: 62.
189 Appendix Shutter CMO S electronic shutter, mec hanical shutt er Shutter Spe ed Snapshot (Auto): 1 to 1/ 2000 second Snapshot (N ight Scene): 4 to 1/2000 sec ond * May differ du e to the camera se tup. Aperture Value F3.0 (W) to F8.8 (W) (ND filter) * Using optica l zoom changes the ap erture value.
190 Appendix Approximate Battery Life All of the values provided below represent th e approximate amount of time under normal temperature (23°C (73°F )) before the camera turns off. These values are not guaranteed. Low temperatures shorten batter y life.
191 Appendix . Rechargeable lithium ion battery (NP-1 10) . Charger unit (BC-110 L) • Power cord precautions for use in Singapore The power cord set is not supplied. The power cord used must comply with relevant national and/or international sta ndards.
CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA1101-C MF.
For a wealth of informatio n about Dyna mic Photo in cluding explanations abou t how to use Dynamic Photo images , the Dynamic Studio image conversion service, sa mple images, and more, visit the special Dynamic Photo website at: This manual provides an introduction to Dy namic Photo, which creates a whole new way to enjoy digital imaging.
2 Dynamic Photo! A totally new way to enjoy digital photography! Dynamic Photo! A totally new way to enjoy digital photography! Dynamic Photo provides an easy way to inse rt built-in subjects into sna pshots and movies for a whole new way to enjoy digital imaging.
3 Creating a Dynamic Photo Image Creating a Dynamic Photo Image Your digital camera comes with a number of subjects in its built-in memory (“built-in subjects”). You can use thes e built-in subjects to cr eat e Dynamic Photo images by inserting them into your original snapshots or movies.
4 Creating a Dynamic Photo Image 4. Use [ 4 ] and [ 6 ] to select the built-in subject that you want to inse rt into the image and then press [SET]. * Only built-in subjects that can be insert ed into other images will appear at this time.
5 Creating a Dynamic Photo Image • Inserting a built-in subject into a snapshot will save a Dynamic Photo that consists of 20 still images of 2M size or smaller. • Inserting a built-in subject in to a movie will save the Dy namic Photo as a movie file.
6 Creating a Dynamic Photo Image You can use the Dynamic Photo image you created in Step 2 in a variety of fun ways. Step 3: Have fun with Dynamic Phot o. On the cam era On a TV Dynamic Photo images play back automatically as soon as you display them on the EXILIM monitor screen.
7 Creating a Dynamic Photo Image On a PC Enjoy watching Dynamic Photo images on your PC screen. In a digital phot o frame Play Dynamic Photo images in a digital photo frame.
An important point after buying a device Casio EX-ZR10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio EX-ZR10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio EX-ZR10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio EX-ZR10 you will learn all the available features of the product, as well as information on its operation. The information that you get Casio EX-ZR10 will certainly help you make a decision on the purchase.
If you already are a holder of Casio EX-ZR10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio EX-ZR10.
However, one of the most important roles played by the user manual is to help in solving problems with Casio EX-ZR10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio EX-ZR10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
