Instruction/ maintenance manual of the product 5242 Casio
Go to page of 11
MO1205-EA E-1 ENGLISH Congratulations upon your selection of this CASIO watch. Applications Built-in sensors are used to take direction, barometric pressure, temperature, and altitude readings, which are displayed by the hands of the watch.
E-8 Contents E-2 About This Manual E-3 Using the Crown E-3 To lock the crown E-3 To unlock the crown E-4 To pull the crown out E-4 To rotate the crown E-4 To start high-speed hand movement E-4 To stop.
E-16 Radio Controlled Atomic Timekeeping This watch receives a time calibration signal and updates its time setting accordingly. However, when using the watch outside of areas covered by time calibration signals, you will have to adjust the settings manually as required.
E-24 Selecting a Mode • The illustration below shows which buttons you need to press to navigate between modes. • To return to the Timekeeping Mode from any other mode, hold down B for about two seconds.
E-32 Home City/DST Hour/Minute Hour Year Day Month (Hold down for about one second.) 4. Rotate the crown to adjust the time (hour and minute) setting. • With the crown pulled out, rotate the crown more than once in the direction that you want to move the hands.
E-40 Using the Compass While Mountain Climbing or Hiking Having an idea of your current location and your destination is essential when mountain climbing or hiking. To do this, you need to “set the map”, which means to align the map so the directions indicated on it are aligned with the actual directions of your location.
E-48 How does the altimeter work? Generally, air pressure and temperature decrease as altitude increases. This watch bases its altitude readings on International Standard Atmosphere (ISA) values stipulated by the International Civil Aviation Organization (ICAO).
E-56 Calibrating the Barometric Pressure Sensor Reading The pressure sensor of this watch is adjusted at the factory and so further adjustment is not required by you.
E-64 3. Rotate the crown to set the alarm time. • With the crown pulled out, rotate the crown more than once in the direction that you want to move the hands. When you release the crown, the x x Minute Hand will start to move at high speed. Note that high-speed reverse movement is not supported.
E-72 • Illumination may not turn on if the face of the watch is more than 15 degrees above or below parallel. Make sure that the back of your hand is parallel to the ground. • Illumination turns off after the preset illumination duration (page E-69), even if you keep the watch pointed towards your face.
E-80 Specifi cations Accuracy at normal temperature: ± 15 seconds a month (with no signal calibration) Timekeeping: Hour, minutes (hand moves every 10 seconds), seconds, day, day of the week Calenda.
An important point after buying a device Casio 5242 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio 5242 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio 5242 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio 5242 you will learn all the available features of the product, as well as information on its operation. The information that you get Casio 5242 will certainly help you make a decision on the purchase.
If you already are a holder of Casio 5242, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio 5242.
However, one of the most important roles played by the user manual is to help in solving problems with Casio 5242. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio 5242 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
