Instruction/ maintenance manual of the product 3356 Casio
Go to page of 9
Operation Guide 331 1/3356 1 MA0406-EA • The display will automatically revert to the T imekeeping screen if you leave the Battery Level, Alarm, or Hand Setting screen displayed without performing any operation for about two or three minutes.
Operation Guide 331 1/3356 2 ❚ Charging Guide Starting from a full charge, the watch should be able to continue operating for about five months without further charging under the conditions described below . Daily Use (All time values are approximate.
Operation Guide 331 1/3356 3 Reception Range This watch is designed to receive the standard time calibration signal of Japan (JJY) or of the United States (WWVB). The signal that is received depends on the current Home City setting. • For information about selecting a Home City , see “Selecting Y our Home City”.
Operation Guide 331 1/3356 4 ❚ Selecting Y our Home City Note that time calibration signal reception is performed only when one of the city codes shown below is selected as the Home Ci ty . • Select TYO (T okyo) as your Home City if you plan to use the watch in Japan.
Operation Guide 331 1/3356 5 ❚ Configuring T ransmitter Selection Mode Settings Note that the transmitter selection mode setting can be configured only when TYO is selected as the Home City . • When using this watch in Japan, it is recommended that you use the “ AT ” (Auto) transmitter selection mode setting.
Operation Guide 331 1/3356 6 Auto receive is turned on (ON), but the receive icon “ ” is not on the display . • The receive icon appears when a signal is received successfully and the time is updated. It is not displayed if there is no successful signal reception throughout the day .
Operation Guide 331 1/3356 7 5. Use the D D D D D (+) and B B B B B (–) buttons to change the minute setting. • Holding down either button changes the setting at high speed. 6. When the setting is the way you want, press the A A A A A button. • This exits the setting screen.
Operation Guide 331 1/3356 8 7. While the day of the week setting is flashing, press the D D D D D button to toggle it between Japanese (kanji) and English. 8. While the Power Saving setting is flashing, press the D D D D D button to toggle it on (ON) or off (OF).
Operation Guide 331 1/3356 9 2. If the second hand does not align properly with the 12 o’clock position, press the D D D D D button to adjust it. • Each press of the D button advances the second hand one second. • Holding down the D button advances the second hand at high speed.
An important point after buying a device Casio 3356 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio 3356 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio 3356 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio 3356 you will learn all the available features of the product, as well as information on its operation. The information that you get Casio 3356 will certainly help you make a decision on the purchase.
If you already are a holder of Casio 3356, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio 3356.
However, one of the most important roles played by the user manual is to help in solving problems with Casio 3356. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio 3356 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
