Instruction/ maintenance manual of the product 2330-2 Casio
Go to page of 2
Module No. 2330 2330-1 GENERAL GUIDE • Press B to change from mode to mode. • If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen. Timekeeping Mode Countdown Alarm Mode Day Counter Mode Alarm Mode Press B .
2330-2 COUNTDOWN ALARM MODE The countdown timer can be set within a range of 1 minute to 24 hours. When the countdown reaches zero, an alarm sounds for 10 seconds or until you press any button. To set the countdown time Note that you cannot change the countdown time setting while a countdown is being performed.
An important point after buying a device Casio 2330-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio 2330-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio 2330-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio 2330-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Casio 2330-2 will certainly help you make a decision on the purchase.
If you already are a holder of Casio 2330-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio 2330-2.
However, one of the most important roles played by the user manual is to help in solving problems with Casio 2330-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio 2330-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
