Instruction/ maintenance manual of the product 54084 Casablanca Fan Company
Go to page of 16
www .CasablancaF anC o.com 1.888.227.2178 1 M8500-01 • 12/17/13 • © Casablanca F an Company PA G E 15 Maintenance & Cleaning T able of C ontents PA G E 7 PA G E 10 PA G E 5 PA G E 6 30 inches.
www .CasablancaF anC o.com 1.888.227.2178 2 M8500-01 • 12/17/13 • © Casablanca F an Company What t o Expec t with Y our Installation Know your wiring If you are unfamiliar with wiring, use a qualied electrician. Y ou may need a friend to help you.
www .CasablancaF anC o.com 1.888.227.2178 3 M8500-01 • 12/17/13 • © Casablanca F an Company T ools Needed Ladder Po wer Drill (optional) 9/64” Drill Bit (optional) Screwdrivers Pliers Wire Strippers If mounting to a support structure, you will also need these tools .
www .CasablancaF anC o.com 1.888.227.2178 4 M8500-01 • 12/17/13 • © Casablanca F an Company If you ha ve an angled ceiling: 1. Y ou will need a longer downrod (sold separately) . 2. If your ceiling angle is greater than 34°, y ou will also need an Angled Mounting Kit (sold separately) .
www .CasablancaF anC o.com 1.888.227.2178 5 M8500-01 • 12/17/13 • © Casablanca F an Company 1.888.227.2178 www .CasablancaF anC o.com C eiling Bracket OFF Make sure all four bumpers are still attached. F or angled ceilings, point opening toward peak.
www .CasablancaF anC o.com 1.888.227.2178 6 M8500-01 • 12/17/13 • © Casablanca F an Company C eiling Bracket (c ontinued) Prepar ation D I S C A R D K E E P ! Remove the shipping blocks from the motor . Sav e the screws . They will be needed for blade iron installation.
www .CasablancaF anC o.com 1.888.227.2178 7 M8500-01 • 12/17/13 • © Casablanca F an Company Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold Separately Included Longer Downrod for angled ceilings or ceili.
www .CasablancaF anC o.com 1.888.227.2178 8 M8500-01 • 12/17/13 • © Casablanca F an Company KEEP! 8” 3/8” C U T & S T R I P (not to scale) Remove the pr e-installed setscrew so that the downrod can be inserted. Slide the adapter cov er onto the downrod , then hand tighten the downrod (at least 4-5 full turns) until it stops.
www .CasablancaF anC o.com 1.888.227.2178 9 M8500-01 • 12/17/13 • © Casablanca F an Company Downrod (c ontinued) 1.888.227.2178 9 www .CasablancaF anC o.com M8500-01 • 12/17/13 • © Casablanca F an Company Put the wires and do wnrod through the canopy .
www .CasablancaF anC o.com 1.888.227.2178 10 M8500-01 • 12/17/13 • © Casablanca F an Company W iring F R O M C E I L I N G B R A C K E T F R O M F A N F R O M C E I L I N G F R O M C E I L I N G .
www .CasablancaF anC o.com 1.888.227.2178 11 M8500-01 • 12/17/13 • © Casablanca F an Company Canop y No te: Fan style may vary . Lift the canopy into place so that the screw holes are aligned . Position the canopy so that, when lifted into place , the canopy ts into the hanging bracket as sho wn.
www .CasablancaF anC o.com 1.888.227.2178 12 M8500-01 • 12/17/13 • © Casablanca F an Company Blades 12 Remember the screws that you k ept after removing the shipping blocks (page 6)? Y ou need them plus ve more from the hardwar e bag f or this step .
www .CasablancaF anC o.com 1.888.227.2178 13 M8500-01 • 12/17/13 • © Casablanca F an Company Swit ch Housing F eed the wire plug through the center hole of the upper switch housing , then wrap keyhole slots around the screws and twist counterclockwise.
www .CasablancaF anC o.com 1.888.227.2178 14 M8500-01 • 12/17/13 • © Casablanca F an Company Connect the plugs from the upper and lower switch housings. Make sure to line up the colored markings on the connectors. Lift the lower switch housing up until the holes line up with the screw holes in the upper switch housing .
www .CasablancaF anC o.com 1.888.227.2178 15 M8500-01 • 12/17/13 • © Casablanca F an Company Swit ch Housing (continued) Maintenanc e & Cleaning The pull chain controls the fan: from high to off . T o swit ch the direc tion of air ow , mov e the reverse switch to the opposite position.
www .CasablancaF anC o.com 1.888.227.2178 16 M8500-01 • 12/17/13 • © Casablanca F an Company T roubleshooting Exc essive wobbling • Tighten all of the blade and blade iron screws until they are snug. • Use the provided balancing kit and instructions to balance the fan.
An important point after buying a device Casablanca Fan Company 54084 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casablanca Fan Company 54084 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casablanca Fan Company 54084 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casablanca Fan Company 54084 you will learn all the available features of the product, as well as information on its operation. The information that you get Casablanca Fan Company 54084 will certainly help you make a decision on the purchase.
If you already are a holder of Casablanca Fan Company 54084, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casablanca Fan Company 54084.
However, one of the most important roles played by the user manual is to help in solving problems with Casablanca Fan Company 54084. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casablanca Fan Company 54084 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
