Instruction/ maintenance manual of the product CAD-280SA Cary Audio Design
Go to page of 8
Cary Audio Design CAD-280SA V-12R Vacuum Tube Stereo or Monobloc Power Amplifiers OPERATION MANUAL NOTE: Before installing your new V-12R power amplifier, please read this manual carefully as it will inform you of the specifications, proper installation procedures and operation procedures.
Specifications for your new V-12R power amplifier. We have updated the V-12 mono and stereo models to a RACING (R) version! The new racing input circuit makes the input sensitivity 1.2 volts, similar to most components currently available. Operating the power amplifier is a simple procedure.
1.3 Front Panel Features POWER ON/OFF SWITCH: AC mains switch and high voltage in “ON” position HV LED: Indicates the high voltage supply is ON and the fuse is intact.
INSTALLATION This section describes the unpacking and installation procedures for the CAD-280 SA amplifier. 2.1 Unpacking All shipping containers have been specifically designed to protect their contents and special care has been taken to prevent damage under normal shipping conditions.
The speaker cables from the output posts of the CAD-280 SA to the speaker system can be any convenient length your set-up requires. Select speaker cables of sufficient.
size to preserve the outstanding performance capabilities of your power amplifier. Heavy gauge #14 wire is suitable for distances up to 15 feet, #12 wire for up to 30 feet. Your Authorized Cary Audio Dealer will have proper speaker cable in stock for this purpose.
3.6 Bias Measurement The bias is factory preset. It is a good idea to measure it during the initial setup to make sure it is set to the specifications provided at the end of this manual. The AC voltage may be different from one area to the next. Follow the instructions provided.
! PLEASE OBSERVE THE SAFETY DIRECTIONS IN THIS MANUAL TO AVOID POSSIBLE ELECTRICAL SHOCK OR EQUIPMENT FAILURE DUE TO IMPROPER INSTALLATION! Cary Audio Design 1020 Goodworth Drive Apex, North Carolina 27539 Tel: 919-355-0010 Fax: 919-355-0013 www.caryaudio.
An important point after buying a device Cary Audio Design CAD-280SA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cary Audio Design CAD-280SA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cary Audio Design CAD-280SA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cary Audio Design CAD-280SA you will learn all the available features of the product, as well as information on its operation. The information that you get Cary Audio Design CAD-280SA will certainly help you make a decision on the purchase.
If you already are a holder of Cary Audio Design CAD-280SA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cary Audio Design CAD-280SA.
However, one of the most important roles played by the user manual is to help in solving problems with Cary Audio Design CAD-280SA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cary Audio Design CAD-280SA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
