Instruction/ maintenance manual of the product CAD-211M Cary Audio Design
Go to page of 8
CAD-211M OPERATING MANUAL Note: Before installing you new CAD-211M, please read this manual carefully. This manual will inform you of the CAD-211M specifications, proper installation procedures and operation procedures. Also included in this manual are guidelines on how to properly service and care for your new CAD-211M.
2 SPECIFICATIONS Operating the CAD-211M amplifiers is a simple procedure since each unit is designed for long term stability in virtually any home operating situation. Therefore, if the unit is operated outside the parameters outlined in this owner’s manual, damage may result.
3 2 - 300B Driver 2 - 6SN7 Input OUTPUT IMPEDANCE: 4,8 and 16 ohm INPUT POWER REQUIREMENTS: 117V/220V 50 - 60 Hz POWER CONSUMPTION: 265 watts "OPERATE" 220 watts "STAND BY" DIMENSI.
4 1.3 Top Panel Features AC-ON SWITCH: Turns AC power on STAND-BY SWITCH: Turns high voltage on 1.4 Rear Apron Features OUTPUT: Three 5-way copper binding posts provide outputs for 4 ohm, 8 ohm and 16.
5 INSTALLATION This section describes the unpacking and installation procedures for the CAD-211M mono-blocks. 2.2 Unpacking All shipping containers have been specifically designed to protect its contents and special care has been taken to prevent damage under normal shipping conditions.
6 2.5 Power Requirements The CAD-211M is designed to operate from house current mains. The design voltage is 117 VAC at 50/60Hz. (Foreign units 220 VAC at 50/60 Hz) 2.6 Cables The speaker cables from the output posts to the speaker system can be any convenient length required.
7 listen to music, simply flip the stand-by switch to the “REAR” position. Under these conditions the CAD-211M is always ready for peak performance. 3.4 Break In Period The tubes, capacitors and output transformer take approximately 100 hours of music playing time to operate at peak performance.
8 factory without a Return Authorization Number from the Customer Service Department. Cary Audio Design will not assume responsibility for transit damage or loss if problems are due to improper packing or lack of insurance. WARNINGS Make no attempt to put the CAD-211M in service outside of the cabinet.
An important point after buying a device Cary Audio Design CAD-211M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cary Audio Design CAD-211M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cary Audio Design CAD-211M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cary Audio Design CAD-211M you will learn all the available features of the product, as well as information on its operation. The information that you get Cary Audio Design CAD-211M will certainly help you make a decision on the purchase.
If you already are a holder of Cary Audio Design CAD-211M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cary Audio Design CAD-211M.
However, one of the most important roles played by the user manual is to help in solving problems with Cary Audio Design CAD-211M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cary Audio Design CAD-211M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
