Instruction/ maintenance manual of the product pxm250, pxm450, pxm900 Carver
Go to page of 20
A Division Of Phoenix Gold International, Inc. Made In America 9300 Nort h De c at ur ● P o r tla n d OR 97203 ● T el : 5 03.288 .2 008 ● F a x: 503.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL T.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL T.
4 Power Output, both channels driven: (1kHz, 1%THD), 175W per channel into 2 ohms, 125W per channel into 4 ohms, 75W per channel into 8 ohms Continuous Average Output Power, both channels driven: (20H.
4 Power Output, both channels driven: (1kHz, 1%THD), 175W per channel into 2 ohms, 125W per channel into 4 ohms, 75W per channel into 8 ohms Continuous Average Output Power, both channels driven: (20H.
6 Power Output:, both channels driven: (1kHz, 1%THD), 275W per channel into 2 ohms, 225W per channel into 4 ohms, 150W per channel into 8 ohms Continuous Average Output Power, both channels driven: (2.
6 Power Output:, both channels driven: (1kHz, 1%THD), 275W per channel into 2 ohms, 225W per channel into 4 ohms, 150W per channel into 8 ohms Continuous Average Output Power, both channels driven: (2.
Power Output, both channels driven: 550W per channel into 2 ohms 450W per channel into 4 ohms 300W per channel into 8 ohms Continuous Average Output Power, both channels driven: (20Hz to 20kHz, with n.
Power Output, both channels driven: 550W per channel into 2 ohms 450W per channel into 4 ohms 300W per channel into 8 ohms Continuous Average Output Power, both channels driven: (20Hz to 20kHz, with n.
.
.
Figure A From Channel 1 + GND (Shield) From Channel 2 + GND (Shield) From Channel 1 – + GND (Shield) From Channel 2 – + GND (Shield) From Channel 1 From Channel 2 – + GND (Shield) TIP + SLEEVE (.
Figure A From Channel 1 + GND (Shield) From Channel 2 + GND (Shield) From Channel 1 – + GND (Shield) From Channel 2 – + GND (Shield) From Channel 1 From Channel 2 – + GND (Shield) TIP + SLEEVE (.
Bridged Mono "Bridged Mono" mode is used to tie the two amplifier channels together thereby doubling the power of the amp into a mono load. To configure the amplifier for "Bridged Mono" operation, change the output configuration switch located on the back panel of the amplifier.
Bridged Mono "Bridged Mono" mode is used to tie the two amplifier channels together thereby doubling the power of the amp into a mono load. To configure the amplifier for "Bridged Mono" operation, change the output configuration switch located on the back panel of the amplifier.
In Case of Difficul ty If you are having trouble, or suspect a problem with your PXm amplifier, try some simple troubleshooting before contacting an Authorized Carver Professional Dealer, Authorized Carver Professional Service Center or Carver Professional T echnical Service.
In Case of Difficul ty If you are having trouble, or suspect a problem with your PXm amplifier, try some simple troubleshooting before contacting an Authorized Carver Professional Dealer, Authorized Carver Professional Service Center or Carver Professional T echnical Service.
18 Cables and Accessories For the optimum connection of your PXm amplifier, here is a sample of the many accessory products available from Carver Professional.
18 Cables and Accessories For the optimum connection of your PXm amplifier, here is a sample of the many accessory products available from Carver Professional.
A Division Of Phoenix Gold International, Inc. Made In America 9300 Nort h De c at ur ● P o r tla n d OR 97203 ● T el : 5 03.288 .2 008 ● F a x: 503.
An important point after buying a device Carver pxm250, pxm450, pxm900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Carver pxm250, pxm450, pxm900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Carver pxm250, pxm450, pxm900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Carver pxm250, pxm450, pxm900 you will learn all the available features of the product, as well as information on its operation. The information that you get Carver pxm250, pxm450, pxm900 will certainly help you make a decision on the purchase.
If you already are a holder of Carver pxm250, pxm450, pxm900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Carver pxm250, pxm450, pxm900.
However, one of the most important roles played by the user manual is to help in solving problems with Carver pxm250, pxm450, pxm900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Carver pxm250, pxm450, pxm900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
