Instruction/ maintenance manual of the product SA-430-83FX Carson
Go to page of 9
TB0334B Page 1 of 9 10/18/03 Carson Manufacturing Co., Inc. 5451 North Rural Street Indianapolis, IN 46220 Phone: (888) 577-6877 Fax: (317) 254-2667 www.
TB0334B Page 2 of 9 10/18/03 SA-430-83 SPECIFICATIONS INPUT POWER: 11-16 Volts DC, 8 Amps DC per 100W Speaker Power off current to amplifier is 1mA Max.
TB0334B Page 3 of 9 10/18/03 INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties.
TB0334B Page 4 of 9 10/18/03 CONTROL HEAD ELECTRICAL CONNECTIONS All control head leads may be extended with #22 AWG or larger lead wire. Negative Connection (Black) - Connect to same ground or negative supply as amplifier. Positive Connection (Red) - Connect to positive DC supply.
TB0334B Page 5 of 9 10/18/03 AMPLIFIER ELECTRICAL CONNECTIONS Disconnect vehicle battery before maki ng the follow ing electrical connections. Electrical connections to the amplifie r are made using the wiring harness suppli ed. If the amplifier needs service the connector can be easily removed without unw iring the harness.
TB0334B Page 6 of 9 10/18/03 OPERATION Sound Hazard - Sound level from siren speaker (>120d BA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protec tion for you and anyone in immediate vicinity. (Ref. OSHA 1910.
TB0334B Page 7 of 9 10/18/03 SERVICE This unit is designed to provide years of reliable servic e under even the worst conditions. Many times there may appear to be a problem with the unit when the true problem is in the speaker(s) or improper installation.
TB0334B Page 8 of 9 10/18/03 PARTS 3 9 6 5 RADIO HORN MAN WAIL YELP PHAS ER SIREN PA V OL SA 430 POWER ON 1 7 2 4 8 12 11 10 Control Head Item Part # Description 1 8025 DRS/CAP Button, red w/ dress nu.
TB0334B Page 9 of 9 10/18/03 CONTROL HEAD INSTALLATION TEMPLATE 5-1/4” 2-5/8” 5-7/8” 6-1/4” 1/2” 1/8” 2-7/8” 2-1/2” This inner area to be removed. CAUTION: Please note that top and bottom edges only provide 1/8” overlap. Cut carefully.
An important point after buying a device Carson SA-430-83FX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Carson SA-430-83FX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Carson SA-430-83FX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Carson SA-430-83FX you will learn all the available features of the product, as well as information on its operation. The information that you get Carson SA-430-83FX will certainly help you make a decision on the purchase.
If you already are a holder of Carson SA-430-83FX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Carson SA-430-83FX.
However, one of the most important roles played by the user manual is to help in solving problems with Carson SA-430-83FX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Carson SA-430-83FX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
