Instruction/ maintenance manual of the product DX111425CD Campbell Hausfeld
Go to page of 4
8 Limited W arranty 1. DURATION: From the date of purchase by the original purchaser as follows: One Year. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 424-8936 3.
Notes DX111425CD & DX151905CD Maximum Size Drill Bits Drill Model Max. Bit Size DX111425CD 3/8” (10 mm) DX151905CD 3/8” (10 mm) General Safety Information (Cont’d.) WORK AREA Do not operate a power tool in an explosive atmosphere, such as in the presence of flammable liquids, gases, or dust.
6 Operating Instructions and Parts Manual Part Description Number Charger – 19.2V DC / 240 VAC, Australia SV566900AV Battery Pack – 19.2V DC / 240 VAC, Australia DG 101000PY Charger – 14.4V DC / 240 VAC, Australia SV567000AV Battery Pack – 14.
Operation (Cont’d.) Do not use the power of the drill to loosen or tighten bit while holding chuck. The spinning chuck will cause friction burn or hand injury. REMOVING CHUCK Remove battery pack. Rotate clutch ring to drill bit symbol and open chuck all the way.
An important point after buying a device Campbell Hausfeld DX111425CD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Campbell Hausfeld DX111425CD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Campbell Hausfeld DX111425CD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Campbell Hausfeld DX111425CD you will learn all the available features of the product, as well as information on its operation. The information that you get Campbell Hausfeld DX111425CD will certainly help you make a decision on the purchase.
If you already are a holder of Campbell Hausfeld DX111425CD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Campbell Hausfeld DX111425CD.
However, one of the most important roles played by the user manual is to help in solving problems with Campbell Hausfeld DX111425CD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Campbell Hausfeld DX111425CD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
