Instruction/ maintenance manual of the product Aquasteam 1200 Whirlpool
Go to page of 14
CONTENTS DEFINITION OF USE BEFORE USING THE WASHING MACHINE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE DOOR BEFORE THE FIRST WASH CYCLE PREPARATION OF THE WASHING DETER.
GB 2 DEFINITION OF USE This washing machine is exclusively destined to wash machine washable laun dry in quantities which are usual for private households. • Observe the instructions gi ven in these Instructions for Use, the Installation Guide and the Programme Chart when using the washing machine.
GB 3 PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Safety instructions • The washing machine is appropriate for indoor use only. • Do not store flammable fl uids near the appliance. • Children must be supervised to ensure that they do not play with the appliance.
GB 4 DESCRIPTION OF THE WASHING MACHINE DOOR BEFORE THE FIRST WASH CYCLE 1. Worktop 2. Control panel 3. Detergent dispenser 4. Service plate (inside the door) 5. Door 6. Pump access / filter behind plinth (and emergency ho se, depending on the model) 7.
GB 5 PREPARATION OF THE WASHING 1. Sort the laundry according to... • Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics, wool, handwash items. • Colour Separate coloured and white items. Wash new coloured articles separately.
GB 6 Where to put detergent and additives The detergent drawer has three chambers (fig. “ A ”). Prewash Chamber • Detergent for the prewash Main Wash Chamber • Detergent for the main wash • Stain remover • Water softener Softener Chamber • Fabric softener • Liquid starch Pour additives only up to the “MAX” mark.
GB 7 DRAINING RESIDUAL WATER/ REMOVING THE FILTER We recommend that you ch eck and clean the filter regularly, at least two or three times a year. Especially: • If the appliance is not draining properly or if it fails to perform spin cycles.
GB 8 CARE AND MAINTENANCE Appliance exterior and control panel • Can be washed down with a soft, damp cloth. • A little neutral detergent (non abrasive) can also be used. • Dry with a soft cloth. Appliance interior • After each washing, leave the door open for some time to allow the inside of the appliance to dry.
GB 9 Water supply hose(s) If a supply hose shows a damage, replace it by a new hose of the same type, available through ou r After-Sales Service or your specialist dealer. If your supply hose has a tran sparent hose coating (fig. “ C ”), periodically check th e colour of the transparent coating.
GB 10 TROUBLESHOOTING GUIDE Your washing machine is equipped wi th various automatic safety functi ons. These enable faults to be detected in good time and the safety system can react appropriately. Th ese faults are frequently so minor that they can be removed within a few minutes.
GB 11 Description of red indications Red indication lights up Indication on big display (if available on your model) Description Causes Solutions “Water tap closed” --- Appliance has no or insuff icient water supply. The “Start/Pause” light blinks.
GB 12 Red indication lights up Indication on display Description Causes Solutions “Service” from “F02” to “F35” (except “F24”) “Electrical module fault” Push the “Reset” button for at least 3 seconds. from “F40” to “F43” “Electrical module fault” Make sure that the water tap is open.
GB 13 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the problem yourself (see “Troubleshooting Guide”). 2. Restart the programme to check whether the problem has solved itself. 3. If the washing machine continues to function incorrectly, call our After-Sales Service.
GB 14 ELECTRICAL CONNECTION For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approv ed fuse to BS 1362 type and proceed as follows: 1.
An important point after buying a device Whirlpool Aquasteam 1200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool Aquasteam 1200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool Aquasteam 1200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool Aquasteam 1200 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool Aquasteam 1200 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool Aquasteam 1200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool Aquasteam 1200.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool Aquasteam 1200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool Aquasteam 1200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
