Instruction/ maintenance manual of the product PW24-2 Telex
Go to page of 8
PW24-2 2.4GHZ WIRELESS SYSTEM FOR POLICE VIDEO RECORDING USER GUIDE Revision B Page 1 of 8 10/11/06.
TABLE OF CONTENTS 1. Quick Set Up and Operat ion ....................................................... 3 2. Insta llation .................................................................................... 4 3. Guidelines For Be st Perfo rmance ...
QUICK SET UP AND OPERATION Synching Up The Transmitter and Base 1) Turn the transmitter power switch to on and place the transmitte r in the recharge cradle of the base.
microphone starts recordin g at the same time. The transmitter must be turned on and in standby mode. 19) A +5V signal on the Auto Talk line means the microphone is off. 20) 0V or ground on the Auto Talk line turns on the microp hone INSTALLATION 1. Wire the un-terminated si gnal wires to the control unit accordin g to the signal chart.
2. Plug the 3.5mm stereo plug into the au dio input jack of the recordi ng device. 3. If it is to be used, plug in the in-car micr ophone into the In-Car Mic jack in the side of the receiver base. 4. Turn on the transmitter and place it in the charging cradle with the beltclip fa cing out.
5) Trouble Shooting Guide Problem Possible Causes Solutions No audio and no In-Use LE D light on the receiver when transmitter is on and In-Use Receiver is not powered Make sure that the power supply is properly connect ed Transmitter and receiver not synchronized Turn on transmitter and place in recharge cradle.
PR24 RECEIVER BASE STATION Indicators INUSE LED: GREEN CHARGE LED : CHARGING -> RED FULL CHARGED -> GREEN Connections In Car Mic 2.5mm Mono Plug Un-terminated Cord RED +12V DC Power BLUE Microph.
Factory Service (North America) If factory service is required, ship the un it prepaid in it s original carton to: Telex Audio Service c/o Telex Communications 8601 East Cornhusker Highway Lincoln, NE 68507-9702 U.
An important point after buying a device Telex PW24-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Telex PW24-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Telex PW24-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Telex PW24-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Telex PW24-2 will certainly help you make a decision on the purchase.
If you already are a holder of Telex PW24-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Telex PW24-2.
However, one of the most important roles played by the user manual is to help in solving problems with Telex PW24-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Telex PW24-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
