Instruction/ maintenance manual of the product 39234XX1 Axor
Go to page of 8
Citterio 39234XX1 Citterio 39134XX1 39154XX1 Installation Instructions / W arranty.
2 Axor Citterio Widespread Lav Mixer 39134XX1, 39154XX1 Axor Citterio Bidet Mixer 39234XX1 39134XX1 39234XX1 T echnical Data Recommended hole size spout 1 3/8“ valves 1 1/4“ Maximum depth of mounting surface 1 1/8“ Flow rate @ 45 psi 2.2 gpm Maximum water pressure 145 psi Recommended water pressure: 14.
3 • Install the valve bodies to the lavator y . • Install the spout to the handle assembly . Use a 5 mm allen wrench to install and tighten the spout retaining screws. • Place the spout and handle assembly over the valve bodies. T ighten the valve mounting screws.
4 • Place a compression nut and ferrule over the spout tube. • Install the mounting angle. T ighten the compression nut by hand, then finish tightening with a wrench. • Screw the hot and cold connection hoses to the mounting angle. • Place a compression nut and washer over the shank end of one of the connection hoses.
5 Install the pop-up drain Remove the plunger assembly . Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. W rap the threads with plumbers’ thread tape and replace. Install the white, flexible sealing gasket to the flange.
6 User instructions T urn the right handle clockwise to turn the cold water on. T urn the handle counter-clockwise to tur n the cold water off. T urn the hot handle clockwise to turn the hot water on. T urn the hot handle counter-clockwise to turn the hot water off.
7 Cleaning Recommendation for Hansgrohe Pr oducts Modern faucetr y and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality . T o avoid damage, it is necessar y to use some caution when cleaning.
C. Labor or other expenses for the disconnection, deinstallation, or return of the product for warranty service, or for installation or reinstallation of the product (including but not limited to proper packaging and shipping costs), or for installation or reinstal- lation of the product.
An important point after buying a device Axor 39234XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axor 39234XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axor 39234XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axor 39234XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Axor 39234XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Axor 39234XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axor 39234XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Axor 39234XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axor 39234XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
