Instruction/ maintenance manual of the product RT850 Aube Technologies
Go to page of 2
RT8 50 400-274-000-D 2007-12-21 1/2 The RT850 Solid S tate Relay is designed to control a line-voltage resistive load from a 24 V AC control signal or from signa l sources of 4 to 32 VDC. It can be used with fast-commuting th ermostat (e.g. cycles of 15 seconds).
RT8 50 400-274-000-D 2007-12-21 2/2 Ambient operating temp .: -4 °F to 140°F (-20 °C to 60°C) Ambient storage : -40°F to 175°F (-40°C to 80°C) Humidity limit s : 0 to 95% non-condensing Net weight : 15.
An important point after buying a device Aube Technologies RT850 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aube Technologies RT850 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aube Technologies RT850 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aube Technologies RT850 you will learn all the available features of the product, as well as information on its operation. The information that you get Aube Technologies RT850 will certainly help you make a decision on the purchase.
If you already are a holder of Aube Technologies RT850, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aube Technologies RT850.
However, one of the most important roles played by the user manual is to help in solving problems with Aube Technologies RT850. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aube Technologies RT850 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center