Instruction/ maintenance manual of the product VW221 Asus
Go to page of 21
LCD Monitor User Guide Jul 200 8 E 3702 V 2 V W 224/VW221 Series.
ii Copyright © 200 8 ASUST eK COMPUTER INC. All Rights Reserved. No part of this ma nual, including the product s and software described in it, may be reproduced, tra nsmitted, transcribed, stored in.
iii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
iv Safety information • Before setting up the monitor , carefully read all the documentation that came with the package. • T o prevent re or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury .
v Care & Cleaning • Before you lift or reposition your monitor , it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor . When lifting or carrying the monitor , grasp the edges of the monitor .
vi Where to nd more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www .
1-1 1.1 Welcome! Thank you for purchasing the ASUS ® The latest widescreen LCD monitor from ASUS provides a crisper , broader , and brighter display , plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual 1.
1-2 Chapter 1: Product introduction 1.3 Assembling the monitor base T o assemble the monitor base: 1. Connect the base with the monitor. A click indicates that the base has been connected successfully . 2. Adjust the monitor to the angle that is most comfortable for you.
1-3 1.4 Monitor introduction 1.4.1 Front of the LCD monitor 1. button: • Automatically adjust the image to its optimized position, clock, and phase by long pressing this button for 2-4 seconds (for VGA mode only).
1.4.1 . 2 4 5 7 1 2 3 1. button: • Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement T echnology . • Exit the OSD menu or go back to the previous menu as the OSD menu is active.
4. Button: • Press this button to increase the value of the function selected or move to the previous fuction. • This is also a hotkey for Brightness adjustment.
1.4.2 Rear connectors of the LCD monitor 2 . Audio-in port . This port connects PC audio source by the bundled audio cable. ( O nly for some models ) 1. AC-IN port . This port connects the power connector from the bundled power cord. 3 . DVI port . This 24-pin port is for PC (Personal Computer) DVI-D digital signal connection.
2. 1 Detaching the arm/stand (for VESA wall mount) VESA wall mount. T o detach the arm/stand: 1. Remove the arm cover . 2. Have the front of the monitor face down on a table. 3. Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows.
2. 2 Adjusting the monitor • For optimal viewing, we reco mmend that you look at the full face of th e monitor , then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle.
3-1 3.1 OSD (On-Screen Display) menu 3.1.1 Howtorecongure 1. Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions.
3-2 Chapter 3: General Instruction 2. Image Y ou can adjust brightness, contrast, sharpness, saturation,position (VGA only), and focus (VGA only) from this main function. P1 • Brightness: the adjusting range is from 0 to 100. is a hotkey to activate this function.
3-3 5. SystemSetup Allow you to adjust the system. • V olume: the adjusting range is from 0 to 100. is a hotkey to activate this function. • OSD Setup: adjusts the horizontal postition (H-Position) and the vertical position (V -Position) of the OSD.
3-4 Chapter 3: General Instruction 3.2 Specications summary *Specicationsaresubjecttochangewithoutnotice. Model V W224U V W224T Panel Size 2 2 "Wide 2 2 "Wide Max. Resolution WSXGA+ 1680 x 1050 WSXGA+ 1680 x 1050 Brightness (Typ.
*Specicationsaresubjecttochangewithoutnotice. Model V W 221S V W 221D Panel Size 21.6"Wide 21.6"Wide Max. Resolution WSXGA+ 1680 x 1050 WSXGA+ 1680 x 1050 Brightness (Typ.
3.3 Troubleshooting (FAQ) Problem PossibleSolution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is no screen image • Check if the monitor and the computer are in the ON mode.
3. 4 640x480 31.469 60Hz 25.175 640x480 37.861 72Hz 31.5 640x480 37.5 75Hz 31.5 800x600 35.156 56Hz 36 800x600 37.879 60Hz 40 800x600 48.077 72Hz 50 800x600 46.875 75Hz 49.5 1024x768 48.363 60Hz 65 1024x768 56.476 70Hz 75 1024x768 60.023 75Hz 78.75 1152x864 67.
An important point after buying a device Asus VW221 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Asus VW221 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Asus VW221 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Asus VW221 you will learn all the available features of the product, as well as information on its operation. The information that you get Asus VW221 will certainly help you make a decision on the purchase.
If you already are a holder of Asus VW221, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Asus VW221.
However, one of the most important roles played by the user manual is to help in solving problems with Asus VW221. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Asus VW221 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
