Instruction/ maintenance manual of the product DV-BD507 Onkyo
Go to page of 56
Connections ............................................................ 13 Playback ..................................................................... 19 Function Setup ..................................................... 33 Others ..............
2 EN 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. F ollow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings . Install in accordanc e with the manufacture’ s instructions.
3 EN 1 . Re cording Cop yright — Unless it ’ s for pers onal use only , re cording copyrighted material is illegal without the per mission of the copyright holder . 2. A C F u se — The AC fuse inside the unit is not user- ser viceable. If you c annot turn on the unit, contac t your Onk yo dealer .
4 EN PRECA UTIONS • Do not use this unit when there ’ s the possibility of moisture condensation occurring . Doing so may damage your discs and certain parts inside this unit. If condensation does occur , remove all discs and leave this unit turned on f or two to three hours .
5 EN IR signal check • If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. • With an AM radio: Tune the AM radio station to a non- broadcasting frequency.
6 EN PRECA UTIONS “BD-LIVE” logo is trademark of Blu-ray Disc Association. Trademark Information HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories.
7 EN C ONTENTS Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Features . . . . . . . . . . . . . . . . . . . . .
8 EN FEA TURES Features Full high-definition video playback Watch movies in the highest picture quality available for your HDTV. This unit offers full high-definition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more true-to-life picture.
9 EN 4 2 5 6 3 1 7 3 2 14 * 6 57 8 9 * 10 FUNC TIONAL O VERVIEW * The unit can also be turned on by pressing these buttons. 1. I / y y ON / STANDBY button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord) 2.
10 EN FUNC TIONAL OVER VIEW 16 17 18 2 3 20 21 23 24 26 25 27 28 22 6 4 5 8 9 12 13 10 7 11* 1 14 15* 19 * The unit can also be turned on by pressing these buttons. 1. DISPLAY button • Press to display the on-screen display menu. 2. ON/STANDBY I / y y button • Press to turn on the unit, or to turn the unit into the standby mode.
11 EN FUNC TIONAL OVER VIEW Installing the Batteries in the Remote Control Install the batteries (AAx2) matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Make sure to match + and - on the batteries to the marks indicated in the battery compartment.
12 EN FUNC TIONAL OVER VIEW Fr ont Panel Display 1 2 • Brightness of the display can be adjusted. Refer to “Panel Display” in “FUNCTION SETUP” on page 43. 1. Displays playback status icon. Refer to the table below. 2. Displays various kinds of information such as title number, elapsed time, repeat mode, etc.
13 EN C ONNEC TIONS Connection to the TV • Make one of the following connections, depending on the capabilities of your existing device. COMPONENT VIDEO IN Y P B P R AUDIO IN L R VIDEO IN HDMI IN an.
14 EN HDMI Output Mode and Actual Output Signals Press [RESOLUTION] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution changes as follows every time [RESOLUTION] is pressed.
15 EN C ONNEC TIONS ■ Audio signals output from HDMI OUT jack “HDMI Audio Out” setting “HDMI Multi (Normal)” “HDMI Multi (LPCM)” “HDMI 2ch” “BD Audio Mode ” setting “HD Audio O.
16 EN C ONNEC TIONS Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information.
17 EN C ONNEC TIONS ■ Audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks For the settings in the “Digital Out” to take effect, “HDMI Audio Out” should be set to “Audio Mute”.
18 EN C ONNEC TIONS Network Connection with LAN • You can use a disc which offers BD-Live function by connecting the unit to the Internet. (For BD-Live information, please refer to page 29) LAN N A L N A W 1 2 3 4 5 No supplied cables are used in this connection: Please purchase the necessary cables at your local store.
19 EN INFORMA TION ON PLA Y BA CK Before you start playing back a disc, read the following information. Pla yable Discs and F iles This unit is compatible to play back the f ollowing discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below.
20 EN Color S ystems BD-video and DVD-video are recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). This unit employs NTSC color system, so the disc you play back must be recorded in the NTSC system.
21 EN INFORMA TION ON PLA Y BA CK ■ Chapter information <Title / Chapter information for BD and AVCHD> 1 1 / 10 B 4 5 1 2 3 T <Chapter information for DVD> 3 / 5 0 : 01 : 02 B 2 6 CHAPTE.
22 EN BASIC PLA Y BA CK BD-V D VD-V A VCHD 1 Press [ON /STANDBY I / y ]. 2 Turn on the TV and select the appropriate input on the TV to which the unit is connected. 3 Press [OPEN / CLOSE A ] to open the disc tray. 4 Place the disc on the disc tray with its label side facing up.
23 EN BASIC PLA YBA CK Operations Using Title Menu, Disc Menu, and Pop-up Menu BD-V D VD-V A VCHD Many of BD-video and DVD-video disc contains title menu (BD-video / DVD-video / AVCHD), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc.
24 EN BASIC PLA YBA CK It is recommended that MP3 files to be played back in this unit are recorded under the following specifications: • Sampling frequency: 32 kHz, 44.
25 EN BASIC PLA YBA CK Inserting the SD Memor y Card and Playback 1 Insert an SD Memory Card, with the label side facing up, into the SD CARD slot until it clicks. If no disc is in operation, “Media Select” screen will appear on the TV screen. SD Memory Card 2 Use [ K / L ] to select "SD Card", then press [ENTER].
26 EN SPECIAL PLA Y BA CK F ast Forward / F ast Rev erse BD-V D VD-V A VCHD CD MP3 1 During playback, press [FWD D ] repeatedly for fast forward. During playback, press [REV E ] repeatedly for fast reverse. Every time you press [FWD D ] or [REV E ] , the playback speed will change.
27 EN SPECIAL PLA YBA CK A-B Repeat BD-V D VD-V A VCHD CD You can play back the specific part (between point A and point B) repeatedly. 1 During playback, press [A-B] at the desired starting point A. 2 During playback, press [A-B] at the desired ending point B.
28 EN SPECIAL PLA YBA CK 3 Press [PLAY B ] to start program playback. • Program playback will start. To exit from the program playback mode: • Press [RETURN] in stop mode.
29 EN Rapid Playback BD-V D VD-V A VCHD This function plays back approximately at 1.3 times the normal playback while keeping the sound output. This function is available only on discs recorded in the Dolby Digital format. 1 During playback, press [MODE] repeatedly until the Rapid playback setting appears.
30 EN SEARCH Using [SKIP H / G ] 1 During playback, press [SKIP G ] to move to the next track. Press it repeatedly to skip to subsequent tracks. Press [SKIP H ] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks.
31 EN Switching Subtitles Some BD and DVD may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case.
32 EN SPECIAL SET TINGS Setting the BD Audio Mode BD-V There are 2 ways to set “BD Audio Mode” setting; whether to output the secondary and interactive audio accompanied by the primary audio or only the primary audio.
33 EN FUNC TION SETUP Using the Setup Menu In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback. Setting items displayed in gray indicates they are not available under the conditions at the time.
34 EN FUNCTION SETUP Custom “Custom” menu contains all the setting items. 1 In stop mode, press [SETUP]. 2 Use [ K / L ] to select , then press [ENTER]. 3 Use [ K / L ] to select your desired setting category, then press [ENTER]. : Language : Video : Audio : Parental : Others • For “Parental” menu, f ollow the procedur e on page 42.
35 EN FUNCTION SETUP ■ Language Language Audio Original Subtitle Off Disc Menu English Player Menu English • For how to select the setting items and options, refer to “Custom” on page 34. Setting items Options Audio Sets the language for audio.
36 EN FUNCTION SETUP ■ Video Video TV Aspect 16:9 Wide HDMI Video Resolution Auto HDMI Deep Color Auto Component Output 480i Progressive Mode Auto Still Mode Auto • For how to select the setting items and options, refer to “Custom” on page 34.
37 EN FUNCTION SETUP Setting items Options Still Mode * 1 Adjusts picture resolution and quality in still mode. Auto*: Automatically selects the best resolution setting (“Frame” or “Field”) based on the data characteristics of the pictures.
38 EN FUNCTION SETUP ■ Audio Audio BD Audio Mode HD Audio Output HDMI Audio Out HDMI Multi (Normal) Down Sampling On DRC Auto • For how to select the setting items and options, refer to “Custom” on page 34.
39 EN FUNCTION SETUP ■ Digital out setting When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be muted and the audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks change depending on “Digital Out” setting.
40 EN FUNCTION SETUP How to navigate through “HDMI Multi(LPCM)”. 1 Use [ K / L ] to select your desired menu item then press [ENTER]. 2 Use [ K / L ] to select your setting items. • Press [RETURN] to go back to the previous screen. 3 Use [ s / B ] to select desired options.
41 EN FUNCTION SETUP Menu Setting items Options Descriptions Delay Time This is a parameter for optimizing the timing at which the sound is output from the speakers according to their distance from the listening position. Distance Feet* Set the desired measure system.
42 EN FUNCTION SETUP ■ Parental Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back the disc.
43 EN FUNCTION SETUP ■ Others Others Angle Icon On Auto Power Off On Panel Display Auto HDMI CEC On Media Select Disc Network Connection Enable(Easy) Software Upgrade • For how to select the setting items and options, refer to “Custom” on page 34.
44 EN Setting items Options Network Connection Enable (Custom) Proxy Setting Do Not Use* Set the proxy server. In most cases, you can connect to the Internet without using proxy server. Use Proxy Address Proxy Port Connection Speed Auto* Set the connection speed.
45 EN FUNCTION SETUP Network Connection Set up the network connection settings in order to use the BD-Live function with a BD-Live disc. Connection T est After you made IP address/DNS settings or when a LAN cable is connected, always perform the connection test to check if the connection is correctly made.
46 EN FUNCTION SETUP If you select “Manual”, follow the following instruction to set the IP address and DNS. 3-a) Use [ K / L ] to select “IP Address”, “Subnet Mask” or “Default Gateway”, then press [ENTER] . IP address setting screen will appear.
47 EN FUNCTION SETUP 3-a) Use [ K / L ] to select “Proxy Address”, then press [ENTER] . Proxy address setting screen will appear. Enter proxy address. • The keyboard screen will appear. Others Proxy Address _ 1 34567890 abc de f gh i j k l m nopq r s t uv wxyz .
48 EN FUNCTION SETUP 5 Press [RETURN] to go back to the previous screen, or press [SETUP] to exit. Disable Deactivate all the network connection and settings. 1 Follow steps 1 to 4 in “Connection Test” on page 45. 2 Use [ K / L ] to select “Disable”, then press [ENTER].
49 EN FUNCTION SETUP Initialize Initialize the setting or SD Memory Card. 1 In stop mode, press [SETUP]. 2 Use [ K / L ] to select , then press [ENTER]. 3 Use [ K / L ] to select a desired option, then press [ENTER]. “Setup” : Resets the setup menu to the default.
50 EN TROUBLESHOO TING If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem Solution No power - Check if the AC cord is properly connected. - Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.
51 EN Problem Solution The password for rating level has been forgotten - Enter the default password “4737”, then your forgotten password will be cleared. Cannot connect the network - Check if the LAN cable connection is properly made. - Turn on the modem or broadband router.
52 EN Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect Ratio The width of a TV screen relative to its height.
53 EN GL OSSARY Region Code Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions).
54 EN Language Code A-B Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla .
55 EN SPECIFICA TIONS General Signal system NTSC color Power requirements 120V AC, 60Hz Power consumption 22W (standby: 0.7W) Dimensions (width x height x depth) 17- 1 / 8 x 2- 3 / 4 x 12- 3 / 16 inches (435 x 69.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.
An important point after buying a device Onkyo DV-BD507 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Onkyo DV-BD507 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Onkyo DV-BD507 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Onkyo DV-BD507 you will learn all the available features of the product, as well as information on its operation. The information that you get Onkyo DV-BD507 will certainly help you make a decision on the purchase.
If you already are a holder of Onkyo DV-BD507, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Onkyo DV-BD507.
However, one of the most important roles played by the user manual is to help in solving problems with Onkyo DV-BD507. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Onkyo DV-BD507 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
