Instruction/ maintenance manual of the product AC-10000E NewAir
Go to page of 16
PLEASE READ AND SAVE THESE INSTRUCTIONS NewAir AC-10000E, AC-10000H Portable Air Conditioner Owner’s Manual.
BEFORE USE GENERAL S AFETY INSTRUCTIONS: AL W A YS OPERA TE THE UNIT IN AN UPRIGHT P OSITION AND PLACE IT ON A FLA T , LEVEL SURF ACE A T LEAST 14” (36CM) A W A Y FROM ANY OTHER OBJECTS (FIG 1 & 4). DO NOT PLA CE OBJECTS ON THE UNIT AND DO NOT COV ER OR OBSTRUCT THE INLET OR OUTLET GRILLES (FIG .
FOR MAXIMUM EFFICENCY: Make sure doors and windows are clo sed while the portable air conditioner is in use. Also keep curtains and blinds closed du ring the sunniest parts of the day while it is in operation.
PARTS LIST Front Back FIG.5 FIG.6 1. Display window 2. Control panel 3. Control buttons 4. Louvers 5. Carrying handle 6. Casters 7. Cord wrap 8. Air filter 9. Air inlet 10. Exhaust air outlet 11. Air inlet 12. Water plug/drainage po rt Accessories 13.
INSTALLATION INSTRUCTIONS Installing the Exhaust Hose FIG.8 1. Open the window and insert the window kit into the open gap. 2. Close the window until the window kit is held securely. You may need to adjust the size of the window kit and secure it with screws.
Positioning the Exhaust Hose Insert the exhaust hose into the back of the unit and tighten it into place. Avoid kinks and bends in the exhaust hose. These can cause expelled moist air to accumulate, resulting in overheating and unexpected shut offs (See Fig 9 & 10).
Installing the Activated Carbon Filter 1. Remove the filter frame from the unit. 2. Remove the activated carbon filter from its plastic bag. 3. Insert the activated carbon filter into the back of the unit. 4. Reattach the filter frame onto the unit. FIG.
OPERATING INSTRUCTIONS Control Panel FIG.14 1. ON/OFF (power) button 2. Timer button 3. Timer indicator light 4. Temperature increase button 5. Compressor indicator light 6. Full water tank indicator light 7. Temperature decrease button 8. Low ventilation indicator light 9.
Setting the Temperature 1. Press the UP or DOWN button to change the set temperature. 2. The display window will then indicate the set temperature. If no temperature is set, the display will show the room ’s ambient temperature. 3. Please note that the default cooling temperat ure of this portable air conditioner is 75 o F.
Regulating the Air Flow Direction FIG. 16 To control the air flow direction, adjust the knob on the louvers. PLEASE NOTE: 1. To prolong the life of the compressor, after turning off the unit, please wait at least 3 minutes before turning it back on. 2.
DRAINING THE UNIT During the cooling process, some water will be extracted from the air and stored within the unit’s water reservoir. If the water reservoir is full, both the co mpressor and motor will stop and the unit will beep (press any button to stop the beeping sound).
• The drainage hose may be extended by adding an extension hose usin g a suitable connecto r. FIG.19 PLEASE NOTE: 1. The drain must be at or bel ow the level of the drainage port. 2. The full water tank indicator light will not work when the unit is being continuously drained.
MAINTENANCE INSTRUCTIONS Always unplug the air conditioner from the power supply before cleaning. T o maximize the efficiency of the air conditioner , regularly clean the unit.
TROUBLESHOOTING The air conditioner does not function. Is the air conditioner plugged in? Is the power outlet functioning correctly? Is the full water tank indicator light flashing? Is the ambient room te mperature lower than the set temperature? The unit does not produce adequate cooling.
TECHNICAL SPECIFICATIONS Model Number: AC-10000E AC-10000H Voltage / Frequency 115V / 60Hz Power Consumption for cooling” 909W / 8.3A Power Consumption for heating ” NIL 830W / 7.6A Air Volume (Maximum Speed) 300 m 3 /h Dehumidification Capacity 2.
LIMITED MANUF ACTURER’S W ARRANTY This appliance is covered by a limited manufac turer ’s warranty . For one year from the original date of purchase, the manufacturer will repair or r eplace any p.
An important point after buying a device NewAir AC-10000E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NewAir AC-10000E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NewAir AC-10000E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NewAir AC-10000E you will learn all the available features of the product, as well as information on its operation. The information that you get NewAir AC-10000E will certainly help you make a decision on the purchase.
If you already are a holder of NewAir AC-10000E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NewAir AC-10000E.
However, one of the most important roles played by the user manual is to help in solving problems with NewAir AC-10000E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NewAir AC-10000E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
