Instruction/ maintenance manual of the product 99-7880B Metra
Go to page of 8
METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION APPLICA TIONS 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-7880B WIRING & ANTENNA.
T able of Contents Dash Disassembly – Honda Odyssey 2011-up 3-4 Kit Assembly – ISO DIN head unit provisions 5 – Double DIN head unit provisions 6 K NO WLEDGE IS P OW ER E nhance your installation and fabrication skills by enrolling in the most re cognized and re spected mobile electronics school in our industry .
1. Unsnap and remove trim around the shifter . (Figure A) 2. Unsnap and remove the passenger side trim panel above the glove box. (Figure B) 3. Unsnap and remove the climate control panel from the controls over to the passenger side.
4 99-7880B Dash Disassembly 4. Remove four Phillips screws from the upper part of the lower center console and pull back the upper part enough to remove the radio. (Figure D) 5. Remove four screws and remove the radio. Remove the factor y brackets for use in kit assembly .
5 Kit Assembly 99-7880B 1. Locate the factor y wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the nega tive batter y terminal and test the unit for proper operation. 2. Mount the factory radio brackets to the head unit with the screws supplied with the unit.
Kit Assembly 99-7880B 6 Double DIN head unit provisions (Figure A) (Figure B) 1. Locate the factor y wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative batter y terminal and test the unit for proper operation.
Notes.
METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-7880B REV .
An important point after buying a device Metra 99-7880B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra 99-7880B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra 99-7880B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra 99-7880B you will learn all the available features of the product, as well as information on its operation. The information that you get Metra 99-7880B will certainly help you make a decision on the purchase.
If you already are a holder of Metra 99-7880B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra 99-7880B.
However, one of the most important roles played by the user manual is to help in solving problems with Metra 99-7880B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra 99-7880B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
