Instruction/ maintenance manual of the product 6OLOSDW Makita
Go to page of 14
Cordless Drill Dimensions (L x W x HI Capacities No load speed SteeliWood Wood screw 10 mm (3/8") MODEL 6OlOSD 10 mm (318") MODEL 6OlOSDW With Quick Charger Net weight INSTRUCTION MANUAL SPEC IF I CAT IONS Model 6010SD I 205 mm x 48 mm x 175 mm 0.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turn- ing it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
ADDITIONAL SAFETY RULES FOR CHARGER AND TOOL 1. The Charger and the tool are specifically designed to work together. Do not attempt to charge any other cordless tool with this Charger. Do not attempt to charge the tool with any other charger. 2. Do not charge the tool when temperature is BELOW 10°C (5OOF) or ABOVE 45OC (113°F).
HOW TO USE Charging Connect the charging plug to the charg- ing connector, then plug in the charger to the power receptacle. Charging takes 3 hours. CAUTION: The battery in your new tool is not fully charged. You will need to charge it be- fore use. Do not operate the tool during charging.
After use, return the chuck key to the storage cavity on the tool. I Switch action Set the reversing switch lever just in front of the trigger switch to Forward (FWD) or Reverse (REV). Then pull the trigger to turn the tool ON and release it to turn it OFF.
Holding tool Hold the tool as shown in the figure. When drilling a large diameter hole, the tool frimly with both hands. hold Drilling in metal Punch a small hole in the metal to prevent the bit from skittering when starting to drill a hole. Use cutting lubricant on the bitto facilitate drilling if necessary.
Screwdriving Match your bit to your screw. ~~ Item I Nominal Diameter (mm) Bit No. Wood Screw 2.1 - 2.7 (3132" - 118") 1. Phillips bits Select your screws and nominal diameter with the chart on the right. No. 2 3.1 - 4.5 (118" - 3/16") 2.
Hole The hole on the heel of the tool is a con- venient way to carry it by a cord, hook or other means. MAINTENANCE CAUTION : Always be sure that the tool is switched off before attempting to perform inspection or maintenance.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
10 mm (3/8") CORDLESS DRILL Model 6010SD Note: The switch and other part configurations may differ from country to country. 12.
MODEL 6010SD 13 14 15 16 17 18 19 20 22 'ZM $zD DESCRIPTION 1 1 1 1 1 1 1 1 1 1 2 4 5 6 7 8 9 10 11 12 Gto DESCRIPTION 6 Screw 3x20 1 1 Holder 6 1 Drill Chuck S10 1 Screw M5x18 1 Gear 1 Plane Bea.
MAKmA LlMmED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 6OLOSDW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6OLOSDW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6OLOSDW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6OLOSDW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6OLOSDW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6OLOSDW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6OLOSDW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6OLOSDW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6OLOSDW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
