Instruction/ maintenance manual of the product LAC-7700R LG
Go to page of 24
LAC7700R_ENG_FS_CI_NEW P/NO : MFL36538207 R LAC7700R /7710R ENGLISH CAR CD/MP3/WMA Receiver Read the manual carefully before using the unit GERMAN Auto-CD-/MP3-/WMA-Receiver Lesen Sie diese Bedienungs.
2 The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
3 8 cm • A defective or soiled disc inserted into unit can cause sound to drop out during playback. • Handle the disc by holding its inner and outer edges. • Do not touch the surface of the unlabeled side of the disc. Do not stick paper or tape etc.
4 Safety note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 T able of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Detaching the control panel Y ou can detach the control panel when leaving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . 1. Press the “ ” button to unlock the control panel.
6 Control panel 1[ SOURCE ] 2 • Skip / Search I I / i i • Seek/ T une • Auto Store [ AS ] • Preset Scan [ PS ] • MP3 T rack +10/-10 U U / u u • Folder Up/Down U U / u u 3 Remote Sensor 4 .
7 1 Remove the battery holder with a sharp product like a ball point pen. 2 Install the battery on the battery holder . 3 Install the battery holder back into its original position. Note • Use only one CR2025 (3V) lithium battery . • Remove the battery if the remote control is not used for a long period of time.
8 Before connecting, make sure that the ignition switch is set to OFF , and remove the battery # terminal to avoid short circuits. BA TTERY PO WER Antenna DIMMER SWITCH IGNITION SWITCH CONTROL RELA Y .
9 A A From antenna B B T o the wiring of the vehicle colors of leads. • BLACK: This lead is for the ground connection. • ORANGE: This lead is for the phone line connection. • PINK: This lead is for the dimmer line connection. • RED: This lead is for connection to the power supply terminal when the ignition switch is set to ACC.
10 T urning the unit on Press MUTE/PWR ( POWER/ on the remote control) or any other button. Note When you insert the CD in the CD slot, the unit turns on. T urning the unit off Press and hold MUTE/PWR ( POWER/ on the remote control). Insert a disc 1 Press to open the control panel.
11 Changing the general settings 1 Press and hold MENU/SEL ( MENU/SEL on remote control) so that one of menu items appears. 2 Press MENU/SEL ( MENU/SEL on remote control) to scroll between menus.
12 AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX ON When using a auxiliary equipment. AUX OFF When not using a auxiliary equipment.
13 Adjusting the sound level 1 Press MENU/SEL ( MENU/SEL on the remote control) repeatedly to select the mode you want to adjust from volume, bass, middle, treble, balance and fader . The indicator lights up in the following order . VOL t BAS t MID t TRB t BAL t FA D 2 Rotate the MUTE/PWR.
14 Bluetooth operation Using a Bluetooth wireless connection Y our unit supports Bluetooth wireless connections. Y ou can set up a wireless link with Bluetooth phone. Starting Bluetooth on your phone Y our phone’s Bluetooth feature may be set to of f by default.
15 Auto Connection On / Off ON : Bluetooth phone with a previous record showing that it has successfully connected will automatically start the connection process when starting the car . OFF : Cancels the function. Auto Answer On / Off ON : If you set the automatic answering function on, hands-free answering call is possible.
16 Missed call notification When an incoming call is not answered, the missed call message is displayed on the your screen. 1 The “ ” appears on the screen. 2 Press B/T to place a call. 3 Press B/T to place a call to entered phone number. 4 T o end the call and hang up the phone, press and hold B/T button.
17 Storing a call number in last answered. If you press any of the preset button 1~6, you can easily store up to 6 phone numbers and laster recall with the press the button. 1 Press B/T to enter the menu. 2 Press U U /AS or u u /PS up or down to select the call number.
18 HSP HSP is short for Head Set Profile. This profile is used for connecting a headset and for communicating terminal wireless technology . GA VDP This profile uses an Initiator (INT), a device (such as a portable player) that initiates a signalling procedure to send a request to an Acceptor (ACP), - such as headphones etc.
19 RDS operarion Note • Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored in the memory . • When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased.
20 Playing an Audio CD and MP3/WMA Disc The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 4. If you change the source, CD play also stops (without ejecting the CD).
21 Intro scan The first 10 seconds of each tracks/files ( SCAN ) or each files in the current selected folder ( SCAN ) on the disc are played. 1 Press SCAN . – SCAN (or SCAN ) appears on the display window . Press and hold SCAN for about 2 seconds during playback.
22 T o go to a particular quickly ( +10/-10 buttons) (If there is no folder or one folder .) Press U U /AS ( U U on remote control) to skip to the next 10 track, and press u u /PS ( u u on remote control) to skip to the previous 10 track. T o skip to the next or previous folder (If there are more than two folders.
23 T roubleshooting : Symptom / : Cause : Correction Power doesn’t turn on. / The unit doesn’t operate. Leads and connectors are not properly connected. Confirm once more that all connections are correct. The fuse is blown. Rectify the problem that caused the fuse to blow , and then replace it.
24 AUX SECTION Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Hz-20 kHz S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
An important point after buying a device LG LAC-7700R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG LAC-7700R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG LAC-7700R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG LAC-7700R you will learn all the available features of the product, as well as information on its operation. The information that you get LG LAC-7700R will certainly help you make a decision on the purchase.
If you already are a holder of LG LAC-7700R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG LAC-7700R.
However, one of the most important roles played by the user manual is to help in solving problems with LG LAC-7700R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG LAC-7700R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
