Instruction/ maintenance manual of the product R5010 LEC
Go to page of 17
USER GUIDE R5010W/R5010B R5510W/R5510B/R5510S.
Introduction Thank you for buying this high quality appliance! This handbook is designed to help you through each step of owning your new appliance, from installation, to use.
Contents For your safety ........................................................................................ 1 About your product ................................................................................... 3 Installing your appliance ....
For Your Safety 1 Disposal of old appliances Before disposing of an old appliance, make sure that you have broken off, or disabled any locking mechanisms to prevent children becoming accidentally locked inside. Remove any plugs and power leads to ensure that the appliance is inoperative.
For Your Safety • Warning: Do not allow the refrigerant circuit to become damaged while using or installing. Should it become damaged, do not use the appliance until you are instructed to do so by a service engineer. Refrigerant can ignite or cause damage to the eye when leaking.
4 5 3, Light bulb 6, Fixed foot 1, Top cover 4, Glass shelves 7, Adjustable foot 2, Freezer 5, Crisper 8, Door shelves Technical Specification MODEL Width(mm) Depth ( mm) Height(mm) Net volume(litres).
25mm 25mm.
Using Your Appliance 5 Getting started Once you have installed your appliance in an appropriate location, follow the start up procedure below: • Before you plug in the appliance, clean thoroughly the inside, and any accessories with warm water and bicarbonate of soda (0.
Using Your Appliance Tips for using this appliance • Before storing cooked foods in the refrigerator, allow them to cool to room temperature. • To maintain adequate air circulation, do not over fill the appliance. If there is too much food inside, the compressor does not work as effectively.
Using Your Appliance Defrosting your appliance The refrigerator defrosting process is carried out auto- matically everytime the compressor stops. The defrost water drains from the cabinet into a tray at the rear of the unit where it evaporates.
Care & Cleaning Before cleaning your appliance You should always unplug this appliance before cleaning. To clean your appliance • Once defrosted, remove the accessories inside and clean the using warm water and a neutral detergent. Do not place them in a dishwasher.
Troubleshooting Before calling Lec Customer Care, please check the table below to see if the problem can be solved without calling for a Service engineer.
0 2.Unscrew the top hinge. 2 screws for fixing the top cover 3.Re-install the top hinge pin,shaft sheath and block piece on the opposite side. a:Move the top hinge to opposite side b:Move the shaft sheath and block piece to opposite side also 5.Move the adjustable foot to the opposite side.
6 2. Remove the screws and bracket from the opposite side and fit back to where the hinge bracket was 4. Remove screws and hinge bracket and refit on opposite side.
The wires in the mains lead are coloured in accordance with the following code: Green and Yellow = Earth Blue = Neutral Brown = Live Changing the Plug Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Model Number Serial Number Date of purchase Installers stamp / Printed name Date of installation Place of purchase: Part(s) replaced Engineers Stamp/ Printed Name Date Service Record 13 Please record your model number and serial number in the space below.
Lec Refrigeration Stoney Lane, Prescot, Merseyside, L35 2XW Customer Care Centre: 08 4 4 815 3737 www.lec.co.uk Lec Refrigeration, a division of Glen Dimplex Home Appliances.
An important point after buying a device LEC R5010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LEC R5010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LEC R5010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LEC R5010 you will learn all the available features of the product, as well as information on its operation. The information that you get LEC R5010 will certainly help you make a decision on the purchase.
If you already are a holder of LEC R5010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LEC R5010.
However, one of the most important roles played by the user manual is to help in solving problems with LEC R5010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LEC R5010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
