Instruction/ maintenance manual of the product WF865 Hotpoint
Go to page of 28
Instructions WF865 WF860 WF840.
C ongr atula tions on choosing Ultima!! 2 F ront adjustable feet Dispenser drawer Hot water inlet point and attached fill hose (red connector) Cold water inlet point and attached fill hose (blue conne.
The f ollowing instruc tions and information will help y ou to get the most out of y our new machine ... Safety first! Installing y our machine A typical wash progr amme T he dispenser Cleaning and ma.
Safety first ● Dispose of packaging materials carefully and keep them w ell aw ay from children. ● When disposing of y our old machine , to minimise risk of injury to children, isolate from the electrical supply , remov e the door , the plug and cut the mains cable off flush with the appliance .
1. Choose a location... Where you install the machine will aff ec t its per formance. ● F or your safety and to comply with electrical regulations , seek professional advic e if you want to install your machine in a bath or show er room. ● Make sure that the elec trical socket and water taps are easily accessible .
6 Hold the transit bolt and slide to the side and then pull out. The bolt and spacer should be remov ed intact. (see below) Using a screw driver , remov e the screw to release the plastic co ver . F irstly , unhook the grey drainage hose and proceed as f ollows , taking care not to loosen the hot and cold water fill hoses .
Make sure that the elec trical socket is accessible. T ake the mains lead from the back of the machine and plug it into the socket. W e do not recommend wiring y our machine directly into the mains supply . Changing the mains lead If you hav e damaged the existing lead and need a new one, contact Hotpoint Ser vice UK on 08709 066066 or www .
Hot and cold fill 1 Unclip both of the fill hoses fr om the back of the machine. 2 Connect the free end of the grey fill hose with the red connector to the HO T water supply (see figure1). Connect the free end of the grey fill hose with the blue connector to the C OLD water supply .
● T ak e care when you r emove the dr ain hose from the clips on the back of the machine. All machines are tested with wat er before they lea ve the factor y so a small amount of water may still be in the hose. ● Do not remov e the hooked end suppor t from the GREY drainage hose when using any of the dr ainage methods detailed below .
7. A djust the feet... Once the machine is in plac e 10 6. Mo ve the machine in to position... Y our machine is heavy so care must be taken when moving it. ● When moving the machine , tak e care not to kink or damage the hoses at the back of machine.
U sing y our machine 11 The rest of this instruction book will help you to make the most of y our new washing machine. W e hav e created the machine f or the way y ou live , by listening to people just like you who use our products. Y ou will find that your new machine has many useful features and is easy t o use.
Sor t your laundry into groups by washcare labels. Load the machine , mak ing sure that clothes are not trapped in the door . Close the washing machine door by pushing it until it clicks.
Choose a suitable detergen t ● F ollow the deter gent manufacturer ’ s recommenda tions to make sur e you use the corr ec t amount for y our wash. ● T o achieve the best wash results , the water hardness , degree of soiling and load size need to be c onsidered and the recommended amount of det ergent used .
When you are using the pre-wash option with your selected programme add detergent t o the pre-wash compar tment ( l symbol). Add the deter gent for the main wash to the main compar tment ( ll symbol). Dispensing liquid detergent W e recommend the use of a detergent dosing ball, as provided by your detergent manufacturer .
Door Lock ed Indicator ... ‘Keyhole ’ symbol The ‘ K eyhole ’ symbol will illuminate 2 seconds after you hav e pressed the ‘ ST ART/CANCEL ’ button and will remain lit throughout the wash programme . The ‘ K eyhole ’ symbol will be flashing at the end of the programme to indicat e that the door is still locked.
W ash progr ammes Spin speed (rpm) W ash T emp ˚C W ash Label Press Button Display Window shows F abric 6kg White cotton and linen without special finishes 95 6kg Non-colour fast cotton, linen or vis.
W ash progr ammes 17 PROGRAMMES & OPTIONS 1.5kg W ool mix tures with cotton or ray on. 40 2.5kg Shrink resistant hand washable wool, woollen blankets.
W ash progr ammes 18 PROGRAMMES & OPTIONS 5kg F or freshening up lightly soiled items. W arning : not for woollen, silk or delicate items. F or freshening up lightly soiled items.
Options 19 Choosing an option button The f eatures listed below ar e all av ailable with any wash programme selected . Stored P rogramme ● This option allo ws y ou to store y our fav ourite programme for wh en you next want to use it . Only one programme can be stored in this function.
20 Options PROGRAMMES & OPTIONS Any of the f ollowing optional wash features can be selected after the wash programme selection. T o choose an optional wash feature , press the option button once or in some cases scroll through the options given in the displa y window .
Options Rinse Hold ● This option holds clothes in the final rinse w ater , keeping them fr esh until y ou are ready to c omplete the programme T o use this option press the ‘R inse Hold’ button once, illuminates in the display window abo ve the ‘R inse Hold’ option button.
Options The f ollowing options can be selected to alter the nature of the chosen wash programme b y changing the spin speed , number of rinses or the programme temperature . T o choose a contr ol option press the option button and scroll thr ough the option menu ’ s, following the displa y window prompts .
Clean and dr y the dispenser draw er , syphons, grate and fabric conditioner exit channel. Regularly clean the outlet pipe area. Removing and cleaning the dispenser dra wer and compartments Note: Y ou should clean the dispenser dra wer r egularly .
T roubleshooting ... The machine will not start... ● Close the door . Check that the machine has power . Choose a progr amme and press the ‘ ST ART/CANCEL ’ button. Check to see if a ‘Keyhole’ symbol is flashing in the display window , if so , see below .
T roubleshooting ... I cannot read the informa tion in the display windo w ... ● If the display window is not showing the correct information, switch the machine Off at the elec tric socket, wait 5 seconds and switch back on. The ‘ Time to End’ display jumps .
26 Hotpoint guar antee “Satisfaction guaranteed or y our money back” W e give you a unique ‘satisfaction guaranteed’ promise - v alid for 90 day s - after you ha ve purchased y our Hotpoint produc t. I f there is a technical pr oblem simply call Hotpoint Repair ser vice or visit our web-site at www .
SERVICE & GU AR ANTEE 27 A f ter sales ser vice “No compan y is better positioned to offer an af ter sales service on a Hotpoint appliance than us - the manufacturer” As par t of our commitment to y ou, all Hotpoint appliances hav e the added benefit of a fully inclusive parts and labour guarantee for the first 12 months .
PRINTED BY SIMLEX, FOUR ASHES, WOL VERHAMPTON 01/2005 - 195042068.03 K ey c ontacts Aft er Sales Service Over 1100 trained specialists, directly employed by us, ensure that you can have complete conf idence in both the appliances and ser vices we of f er .
An important point after buying a device Hotpoint WF865 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hotpoint WF865 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hotpoint WF865 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hotpoint WF865 you will learn all the available features of the product, as well as information on its operation. The information that you get Hotpoint WF865 will certainly help you make a decision on the purchase.
If you already are a holder of Hotpoint WF865, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hotpoint WF865.
However, one of the most important roles played by the user manual is to help in solving problems with Hotpoint WF865. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hotpoint WF865 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
