Instruction/ maintenance manual of the product 5.1T Horizon Fitness
Go to page of 44
T R E A D M I L L Owner’s Guide ELITE 5.1T HRC Entertainment.
.
T A B L E O F C O N T E N T S SAFETY INSTRUCTIONS 3 FOLDING & MOVING 6 LEVELING, POWER & EMERGENCY ST OP 7 KNOW YOUR TREADMILL 8 GETTING ST ARTED 9 DISPLA Y 12 PROGRAM PROFILES 14 COL OUR MONI.
IMPORT ANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Read all instructions before using this treadmill. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this HORIZON FITNESS treadmill WARNING! Connect this exercise product to a properly grounded outlet only.
WARNING! T o reduce the risk of burns, fire, electrical shock or injury to persons: • Never use the treadmill before securing the safety tether clip to your clothing. • If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.
CONGRATULATIONS! on choosing an Elite Series treadmill. Y ou’ve taken an important step in developing and sustaining an exercise program! Y our Horizon Fitness treadmill is a tremendously effective tool for achieving your personal fitness goals. Regular use of your Horizon Fitness treadmill can improve the quality of your life in so many ways.
FOLDING Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill deck to the upright position until the foot lock latch engages and securely locks the deck into position. Make sure the deck is securely latched before letting go.
LEVELING The treadmill should be level for optimum use. Once you have placed the treadmill where you intend to use it, raise or lower the adjustable levelers located on the treadmill base frame. Once you have leveled the treadmill, lock the levelers in place by tightening the nuts against the frame.
KNOW YOUR TREADMILL WATER BOTTLE HOLDER T OUCH P AD CONSOLE UPRIGHT SUPPORT QUICK INCLINE KEY LEVELERS TRANSPORT WHEEL QUICK SPEED KEY GRIP PULSE HANDLEBARS MOTOR COVER SIDE RAIL END CAP RUNNING BEL T.
G E T T I N G S T A R T E D QUICK ST ART UP Simply press the Start button to begin exercising. P AUSE Press the Stop button to pause your workout. RESET Press and hold the Stop button to reset the treadmill.
CHANGING THE SPEED When in a program, the user is able to press any of the desired quick speed keys or up and down buttons to get to a specific speed more quickly . NOTE: When in a speed-based program, if the user presses any of the quick speed keys, all of the remaining speed segments in the program will be modified as well.
CHOOSING A PROGRAM Choose a Program by pressing the up or down buttons. Once the desired programs is selected, press the SELECT button. CHOOSING THE LEVEL Choose the program difficulty level, level 1-10, by pressing the up or down buttons. Available only on certain programs.
D I S P L A Y SELECT Used to view your Calories and Laps during your workout. CALORIES T otal Calories burned during your workout. DISTANCE Miles traveled during your workout. TIME Shown as Minutes:Seconds. View the time remaining or the time elapsed in your workout.
ELEVATION Shown in the top left-hand window. Indicates the incline of your walking or running surface. SPEED Shown in the top right-hand display window. Indicates how fast your walking or running surface is moving. PROGRAM PROFILE Represents the Program profile that you have chosen.
PROGRAM PROFILES MANUAL Customized workout, with no default time INTERVAL Speed changes; time defaults to 30 minutes ROLLING Speed changes; time defaults to 30 minutes WEIGHT L OSS Elevation changes; .
PROGRAM PROFILES AFTER BURNER Elevation changes; time defaults to 30 minutes HRC1 Elevation changes to keep you in your target heart rate; time defaults to 30 minutes HRC2 Elevation changes to keep yo.
ROLLING: Speed changes; time defaults to 30 minutes INTER V AL: Speed changes; time defaults to 30 minutes 16.
HILL RUN: Elevation and speed changes; time defaults to 30 minutes 17 WEIGHT LOS S: Elevation changes; time defaults to 30 minutes.
AFIER UBRNER: Elevation changes; time defaults to 30 minutes HILL CLIMB: Elevation and speed changes; time defaults to 30 minutes 18.
Caution • Do not try to repair the device by yourself. Please switch off the television immedi- ately and then inform our dealers if there is a problem. This television is comprised of many precision electronic components. Disassembling or self-renovation may damage or break the television.
1 2 1. DISPLA Y 2. BUIL T -IN SPEAKER 3. REMO TE SENSOR 4. VOLUME - 5. VOLUME + 6. CHANNEL - 7. CHANNEL+ 8. MODE 9. MENU 10. SET 13 13. TV CONNECTION 12.
Remote Control Operation Guide MUTE ON/OFF TIME SYS 0~9 MIRROR VIDEO MENU -/— MUTE on/off P ower switch No function No function Digit key (0~9) and -/— Mirror image setting AV/TV slection Main menu T ens digit channel select Setting picture display dimension.
1. Channel (digit key 0~9 and -/—) There are 0~99 channels in total available on the remote control. When the channel is a one-digit figure, just push the corresponding digit button, If the channel .
Menu Operation Press MENU to display TV programming menu. 1. PICTURE. Brightness, Colour and Contrast are displayed on the screen 1>. Press Menu to display program as follows: Brightness, Colour, Contrast. 2>. Enter into PICTURE, press CH+/CH- to select the item which needs to be set and is indicated by an arrowhead.
5. PRESET 1>. Includes such functions as: Auto Search, Search, Fine T une, Frequncy , Languge and Default. 2>. Enter into PRESET, Press CH+/CH- to select the item which needs to be set and is indicated by an arrowhead. Characters are in red. 3>.
Suspected Fault Reason P ossibly affected by electric wave interference from vehicle motors, trains, high-voltage power lines or neon lights. No picture and sound Battery pack maybe run-down or improperly connected, AC adapter could be improperly connected.
External antenna jack, earphone jack, audio/video(AV) input jack, External power input jack. Specifications VHF-L: CH1~5,49.75MHz~91.75MHz; VHF-H: CH6~12,168.25MHz~222.75MHz;UHF:CH13~57,471.2 5MHz~869.75MHz; Z1~Z7: 112.25MHz~166.75MHz; Z8~Z35: 224.25MHz~446.
Y our Race Program is designed to add motivation to a workout by allowing you to compete against a selected pacer . T o use your Race Program, follow these instructions: 1. Once the Race Program is selected, Press ‘Select’. 2. Choose the desired P ace (speed) using the up or down buttons or incline keys and press ‘Select’.
Once the ‘THR Zone’ quick program key is selected (5.0T only), wait for 5 seconds and you will see the target heart rate flashing in the Heart Rate window. Using the chart on page 26, determine your target heart rate. Y our target heart rate should be set at a number that you will be able to exercise at throughout the majority of your workout.
T ARGET ZONE HEART RATE CHART Y our T arget Zone is a percentage of your maximum heart rate. T arget Zone will vary for each individual, depending on age, current level of conditioning, and personal fitness goals. The American Heart Association recommends working-out at a T arget Heart Rate Zone of between 60% and 75% of your maximum heart rate.
Y our Custom Program is designed to allow you to create your own programming , with the ability to save your program settings for future workouts. T o use your Custom Program, follow these instructions: 1. Once the Custom Program has been selected, press ‘Select’.
USING YOUR RACK PROGRAM Horizon Fitness treadmills are designed to be reliable and easy to use. However, if you experience a problem, please reference the troubleshooting guide listed below. PROBLEM: The console does not light up. SOLUTION: V erify that the power cord is plugged in properly to the outlet, and that the treadmill switch is turned on.
• Constant movement and vibration due to constantly holding the heart rate handle bars while exercising. If you are receiving erratic heart rate readouts, try to only hold the grips long enough to monitor your heart rate. • When you are breathing heavily during a workout.
ARE THE SOUNDS MY TREADMILL MAKES NORMAL? All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especially new treadmills. This noise will diminish over time, although may not totally go away. Over time, the belt will stretch, causing the belt to ride smoother over the rollers.
TENSIONING THE BEL T If you can feel a slipping sensation when running on the treadmill, the running belt must be tightened. In most cases, the belt has stretched from use, causing the belt to slip.
Cleanliness of your Horizon Fitness treadmill and its operating environment will keep maintenance problems and service calls to a minimum. For this reason, Horizon Fitness recommends that the following preventive maintenance schedule be followed.
Always consult your physician before beginning an exercise program. HOW OFTEN? The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with more frequent exercise.
STRETCH FIRST Before using your Horizon Fitness product, it is best to take a few minutes doing a few gentle stretching exercises. Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into each of these stretches with a slow gentle motion.
An important step in developing a long term fitness program is to determine your goals. Is your primary goal for exercising on your Horizon Fitness treadmill to lose weight? Im- prove muscle? Burn Stress? Prepare for the spring racing schedule? Knowing what your goals are will help you develop a more successful exercise program.
WEEKL Y LOG SHEET 39.
MONTHL Y LOG SHEET 40.
FRAME • LIFETIME Horizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the original owner. ELECTRONICS & P ARTS Horizon Fitness warrants the electro.
.
HORIZON FITNESS Rev. 1.0.
An important point after buying a device Horizon Fitness 5.1T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Horizon Fitness 5.1T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Horizon Fitness 5.1T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Horizon Fitness 5.1T you will learn all the available features of the product, as well as information on its operation. The information that you get Horizon Fitness 5.1T will certainly help you make a decision on the purchase.
If you already are a holder of Horizon Fitness 5.1T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Horizon Fitness 5.1T.
However, one of the most important roles played by the user manual is to help in solving problems with Horizon Fitness 5.1T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Horizon Fitness 5.1T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
