Instruction/ maintenance manual of the product BE813 Glen Dimplex Home Appliances Ltd
Go to page of 28
BE813 Fully Integrated Larder INST ALLA TION AND USER INSTRUCTIONS Y ou must read these instructions prior to using the appliance and retain them for future reference.
.
1 Contents Introduction & safety warning s ...........................................................................2 Electrical requirements ......................................................................................3 T ransportation instructions .
2 Congratulations on your choice of a Belling quality Appliance which has been designed to give you service for many years. W ARNING ! IMPORT ANT ! DO NOT connect the appliance to the electricity supply until all packing and transit protectors have been removed.
ELECTRICAL REQUIREMENTS Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply . Rating label is on the left hand side of fridge liner .
4 TRANSPORT A TION INSTRUCTIONS 1. The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation. 2. If during the course of transport the appliance has to be transported horizontally , it must only be laid on its left hand side when standing in the front of the appliance.
1. T o avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions. 2. Do not operate this appliance unless installed to furniture. 3. The appliance should be located on a smooth surface. The four front and back feet can be adjusted as required.
6 REPOSITIONING THE DOOR Follow the step by step instructions and the diagram below . Numbers in brackets refer to diagrams. 1 2 1 2 4 3 8 7 5 6 8 7.
7 1. Switch off at the socket outlet and pull out the mains plug. 2. Remove all food, loose items and fittings from inside the appliance and door shelves. 3. Unscrew the bolts and remove the upper and bottom hinges from the cabinet and door . (1) (2) 4.
Arrangement Examples (See diagram). 1. Baked, chilled cooked food, dairy products. 2. Meat, sausages, cold cuts, cans. 3. Fruit, vegetables, salads. 4. T ubes, small bottles and cans. 5. Egg tray . 6. Butter , cheese, dairy products. 7. Beverages, large bottles.
The following guidelines and recommendations are suggested to obtain the best results and storage hygiene. 1. Appliance is for the short term storage of fresh food and drinks. 2. Cooked dishes must be stored in airtight covered containers and are best placed on either of the removable shelves.
ST ARTING Final Check Before you start using the refrigerator check that: 1. The feet have been adjusted for perfect levelling. 2. The interior is dry and air can circulate freely . 3. Clean the interior as recommended under "CLEANING AND CARE." 4.
CLEANING AND CARE ** We recommend that you switch of f the larder refrigerator at the socket outlet and pull out the mains plug before cleaning. ** Never use any sharp instruments or abrasive substances, soap, household cleaner , detergent and wax polish for cleaning.
12 REPLACING THE INTERIOR LIGHT BULB (See diagram) Should the light fail to work switch off at the socket outlet and pull out the mains plug. Follow the instructions below to check if the light bulb has worked itself loose.
DO'S AND DON'TS Do- Clean your larder refrigerator regularly . Do- Keep raw meat and poultry below cooked food and dairy products. Do- Keep food for as short a time as possible and adhere to 'Best Before' and "Use By" dates.
14 INST ALLA TION INSTRUCTIONS - DET AILED STEP BY STEP NOTE 1) Height of the product can be adjusted by the help of adjustable feet (front and back) to fit the furniture niche height (B). 2) Do not operate this appliance until it has been installed in the furniture.
15 min.550 B min. 600 min.550 C C 600 D > 150 mm. C D C=100-150 mm.
16 2 7 1 3 4 5 6 3 4 5 6.
17 Note: 1. These dimensions are valid for products,which are hinged on right hand side. 2. When door opening direction is reversed, mirror image of this instruction should be considered. That is, dimensions should be considered for opposite sides. B E E = 1,5 mm is recommended.
18 10 11 12 13 14.
19 15.
20 GUARANTEE DET AILS Y our new Belling product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect.
21 Recycling This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment.
Fully Integrated Larder BE 813 PERFORMANCE Energy efficiency class Energy consumption - Kwh/year Net storage - vol fresh food ltrs (cu.ft.) T otal net vol - ltrs (cu.ft.) Frozen food compartment rating Conservation time from failure Freezing capacity fresh food - kg Climate class Operating noise level dB(A) Net storage - vol frozen food ltrs (cu.
23 WIRING DIAGRAM.
.
.
In case of difficult y within the UK, please call Belling Customer Care Centre Helpline on 08 44 815 3746 When you dial this number you will hear a recorded message an d be given a number of options. This indicates that your call has been accepted and is being he ld in a queue.
An important point after buying a device Glen Dimplex Home Appliances Ltd BE813 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Glen Dimplex Home Appliances Ltd BE813 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Glen Dimplex Home Appliances Ltd BE813 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Glen Dimplex Home Appliances Ltd BE813 you will learn all the available features of the product, as well as information on its operation. The information that you get Glen Dimplex Home Appliances Ltd BE813 will certainly help you make a decision on the purchase.
If you already are a holder of Glen Dimplex Home Appliances Ltd BE813, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Glen Dimplex Home Appliances Ltd BE813.
However, one of the most important roles played by the user manual is to help in solving problems with Glen Dimplex Home Appliances Ltd BE813. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Glen Dimplex Home Appliances Ltd BE813 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
