Instruction/ maintenance manual of the product CE302 Fisher & Paykel
Go to page of 28
NZ A U Installation instructions and User guide Cer amic glass cooktops CE302 and CE604 models.
.
1 Contents Safety and warnings 2 Installation instructions 6 Introduction 14 Using y our cooktop 15 Cooking guidelines 16 Care and cleaning 18 T r oubleshooting 20 W arranty and service 21 Impor tant! SA VE THESE INSTR UCTIONS The models shown in this user guide may not be available in all markets and ar e subject to change at any time.
2 Safety and warnings Y our safety is important to us. Please read this information bef ore using your cooktop . Installation W ARNING ! Electrical Shock Hazard Disconnect the appliance from the mains electricity supply before carrying out any w ork or maintenance on it.
3 Safety and warnings Impor tant sa fety instruc tions Read these instructions c arefully before installing or using this appliance. No c ombustible material or products should be placed on this appliance at any time.
4 Safety and warnings Operation and maintenanc e W ARNING ! Hot Sur face Hazar d During use, acc essible par ts of this appliance will bec ome hot enough to cause burns. Do not let body , clothing or any it em other than suitable cookware contact with the ceramic glass until the surface is cool.
5 Impor tant sa fety instruc tions Nev er use your appliance as a work or stor age sur face . Nev er leave any objects or utensils other than suitable cookw are on the appliance. Do not allow children to play with the applianc e or sit, stand or climb on it.
6 Installation instructions Cooktop and cut out dimensions Cooktop and cutout dimensions (mm) CE302 CE604 A overall width of cookt op 300 578 B overall depth of cooktop 510 511 C height of chassis (below top of bench) 45 52 C 1 height of chassis incl.
7 Installation instructions Clearances A B C C E D Clearances (mm) CE302 CE604 A minimum clearance from rear edge of cut out to: nearest combustible surface 55 55 B minimum clearance from glass surfac.
8 Installation instructions Before y ou install the cooktop , make sure that the benchtop is square and level , and no structural members inter fere with space r equirements the benchtop is made of a .
9 Installation instructions The thermal prot ection barrier must be: removable heat-resistant made from low thermal conductivity material at least 40 mm (CE604) or 20 mm (CE302) belo w the base of the cooktop to ensure adequate ventilation 40 mm min Thermal protection barrier Fig .
10 F astening the cooktop to the bench (CE302 models) 1 T urn the cooktop upside down and plac e it on a soft sur face. 2 Spread the seal around the edges of the ceramic glass with the adhesiv e side facing down, making sure that the whole perimeter is sealed.
11 Installation instructions F astening the cooktop to the bench (CE604 models) 1 T urn the cooktop upside down and plac e it on a soft sur face. 2 Spread the seal around the edges of the cookt op with the adhesive side facing down, making sure that the whole perimeter is sealed but the ends do not ov erlap.
12 Installation instructions Connecting the cooktop to the mains po wer supply Impor tant! This cooktop must be connected to the mains pow er supply only by a suitably qualified person.
13 Final checklist TO BE C OMPLETED B Y THE INST ALLER Is the cooktop earthed? Check that the power supply cable is N O T touching the base of the cooktop . This will ensur e that the cable is not damaged by heat from the cookt op. Check that the power supply cable is not acc essible via cupboard doors or drawers .
14 About your new cookt op Thank you f or buying an E L BA by Fisher & P aykel ceramic glass cooktop. This guide introduces you to all its f eatures. W e recommend you r ead the whole guide before using y our new cooktop, for both safety and cooking success .
15 The cooking zones become red when turned on full . Whenever a cooking zone is turned on, the ‘Cooking zone On ’ indicator light will glow. When a cooking zone is turned off , the ‘Hot sur face ’ indicator light will glow until the glass becomes cool enough to be saf ely touched.
16 Cooking guidelines Cookware Use heavy-gauge, flat, smooth-based cookware that matches the diameter of the cooking zone. This will provide good c ontact with the glass and help reduce cooking times. L ow heat or slow cooking is often due to incorrect cookware size.
17 Cooking guidelines Impor tant! Never leave the applianc e unattended when in use. Boilover c auses smoking and greasy spillovers that may ignite. T ake care when deep-fr ying : oil or fat can o verheat very quickly , particularly on a high setting.
18 Car e and cleaning What? soiling examples How? Important! Light soiling on glass after every use fingerprints and marks stains left by non-sugary liquids (eg water , soup, oil) 1 Wipe with a soft, damp cloth and mild detergent. A microfibr e or ‘ glass’ cloth is ideal for this.
19 Car e and cleaning What? soiling examples How? Important! Hot sugary spills, melted plastic or metal on glass sugar , sugar y syrups jams and jellies vegetables or vegetable water with high sugar c.
20 T roubleshooting T roubleshooting char t Problem P ossible causes What to do Cooking zones cannot be turned on. N o power . Make sure the cooktop is connected to the power supply and that it is switched on at the wall. Check whether there is a power outage in your home or area.
21 W arranty and ser vice Before y ou call for service or assistance ... Check the things you can do yourself . Refer to the installation instructions and your user guide and check that: 1 your product is correctly installed 2 you are familiar with its normal operation.
.
.
.
.
Copyright © F isher & Paykel 2012. All rights r eserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at an y time.
An important point after buying a device Fisher & Paykel CE302 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fisher & Paykel CE302 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fisher & Paykel CE302 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fisher & Paykel CE302 you will learn all the available features of the product, as well as information on its operation. The information that you get Fisher & Paykel CE302 will certainly help you make a decision on the purchase.
If you already are a holder of Fisher & Paykel CE302, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fisher & Paykel CE302.
However, one of the most important roles played by the user manual is to help in solving problems with Fisher & Paykel CE302. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fisher & Paykel CE302 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
