Instruction/ maintenance manual of the product SDI-AVR 100 Extron electronic
Go to page of 5
User ’ s Guide 68-553-01 C Printed in the USA 02 02 High Definition SDI to Component V ideo/RGB Converter SDI to V ideo/RGB Converter HDSDI-ACR 100 SDI-A VR 100.
HDSDI-ACR 100 and SDI-AVR 100 • Installation 3 HDSDI-ACR 100 and SDI-AVR 100 • Installation Installation 2 (2) 4-40 x 1/8" Screws Use 2 mounting holes on opposite corners.
RGB/Component (HDSDI-ACR 100) or RGB/YUV (SDI- A VR 100) switch — Set this switch to the Off position to output RGB video. Set the switch on for component video. Bi/tri-level switch (HDSDI-ACR 100 only) — Set this switch to the On position to output tri-level sync on the component video output.
The equalization applied to the SDI-AVR 100 ’s input signal is sufficient for an input coaxial cable length of at least 1000 feet (305 meters) of Extron SHR cable or Belden 8281 cable.
Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 F ax 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 F ax +31.33.453.4050 Extron Electronics, Asia 135 Joo Seng R oad, #04-01 PM Industrial Building Singapore 368363 +65.
An important point after buying a device Extron electronic SDI-AVR 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Extron electronic SDI-AVR 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Extron electronic SDI-AVR 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Extron electronic SDI-AVR 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Extron electronic SDI-AVR 100 will certainly help you make a decision on the purchase.
If you already are a holder of Extron electronic SDI-AVR 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Extron electronic SDI-AVR 100.
However, one of the most important roles played by the user manual is to help in solving problems with Extron electronic SDI-AVR 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Extron electronic SDI-AVR 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
