Instruction/ maintenance manual of the product U2713HMt Dell
Go to page of 63
Dell™ U2713HM Flat Panel Monitor User Guide Setting the display resolution to 2560 x 1440 (maximum) Information in this document is subject to change without notice. © 2012 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Dell™ U2713HM Flat Panel Monitor User's Guide About Your Monitor Setting Up the Monitor Operating the Monitor Dell Display Manager User's Guide Troubleshooting Appendix Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer.
Back to Contents Page Setting Up Your Monitor Dell™ U2713HM Flat Panel Monitor Setting the display resolution to 2560 x 1440 (maximum) For maximum display performance with Microsoft ® Windows ® operating systems, set the display resolution to 2560 x 1440 pixels by performing the following steps: In Windows XP: 1.
Back to Contents Page About Your Monitor Dell™ U2713HM Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capa.
Stand Power Cable VGA Cable.
USB up stream cable (enables the USB ports on the monitor) Cable Tie Drivers and Documentation media Quick Setup Guide Product and Safety Information Guide Product Features The U2713HM flat panel display has an active matrix, Thin- Film Transistor (TFT), Liquid Crystal Display (LCD).
■ Tilt, swivel, vertical extension (115 mm) and rotate adjustment capability. ■ Removable pedestal and Video Electronics Standards Association (VESA ™ ) 100 mm mounting holes for flexible mounting solutions. ■ Plug and play capability if supported by your system.
Identifying Parts and Controls Front View Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 .
Back View Back view Back view with monitor stand Label Description Use 1 VESA mounting holes (100 mm x 100 mm - behind attached VESA Plate ) Wall mount monitor using VESA - compatible wall mount kit (100 mm x 100 mm) . 2 Regulatory label Lists the regulatory approvals.
Side View Left view R ight view Bottom View.
Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cable. 2 DC power connector for Dell Soundbar Connect the power cord for the soundbar (optional). 3 DisplayPort connector Connect your computer DP cable.
Contrast ratio 1000 to 1 (typical), 2,000,000 : 1 (typical Dynamic Contrast On) Faceplate coating Antiglare with hard - coating 3H Backlight LED edgelight system Response Time 8 ms gray- to - gray (typical) Color depth 16.
VESA, 1280 x 1024 64.0 60.0 108.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1920 x 1080 67.5 60.0 148.5 +/+ VESA, 2048 x 1152 71.6 60.0 197.0 +/+ VESA, 2560 x 1440 88.
Depth 200.3 mm (7.89 inches) Dimensions (without stand) Height 378.2 mm (14.89 inches) Width 639 .3 mm (25.17 inches) Depth 65.6 mm (2.58 inches) Stand dimensions Height (extended) 418.2 mm (16.46 inches) Height (compressed) 372.3 mm (14.66 inches) Width 314 .
Non- operating Storage: 5% to 90% (non- condensing) Shipping: 5% to 90% (non- condensing) Altitude Operating 3,048 m (10,000 ft) max Non- operating 10,668 m (35,000 ft) max Thermal dissipation 342.
** Maximum power consumption with max luminance, Dell Soundbar, and USB active. Pin Assignmentss VGA Connector Pin Number 15 - pin Side of the Connected Signal Cable 1 Video - Red 2 Video - Green 3 Video - Blue 4 GND 5 Self- test 6 GND - R 7 GND - G 8 GND - B 9 Computer 5 V/3.
Pin Numberr 24 - pin Side of th e C o nnected Signal Cable 1 TMDS RX2 - 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1 - 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5 V/+3.
21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock - DisplayPort Connector Pin Numberr 20 - pin Side of the Connected Signal Cable 1 ML0(p) 2 GND 3 ML0(n) 4 ML1(p) 5 GND 6 ML1(n) 7 ML2(p) 8 GND 9.
16 GND 17 AUX(n) 18 HPD 19 DP_PWR Return 20 +3.3 V DP_PWR 19- pin HDMI Connector Pin Numberr 19 - pin Side of the Connected Signal Cable (Cable not included) 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS.
12 TMDS CLOCK - 13 Floating 14 Floating 15 DDC CLOCK (SDA) 16 DDC DATA (SDA) 17 GROUND 18 +5 V POWER 19 HOT PLUG DETECT Plug and Play Capability You can install the monitor in any Plug and Play -compatible system.
USB Upstream C onnector Pin Number Signal Name 1 VBUS 2 D- 3 D+ 4 GND 5 StdB_SSTX - 6 StdB_SSTX+ 7 GND_DRAIN 8 StdB_SSRX - 9 StdB_SSRX+ Shell Shield USB Downstream Connector Pin Number Signal Name 1 V.
3 D+ 4 GND 5 StdA_SSRX - 6 StdA_SSRX+ 7 GND_DRAIN 8 StdA_SSTX - 9 StdA_SSTX+ Shell Shield USB Ports 1 upstream - back 4 downstream - 2 on back; 2 on left side NOTE: USB 3.0 functionality requires a USB 3.0 compatible computer. NOTE: The monitor's USB interface works only when the monitor is on or in power save mode.
Back to Contents Page Setting Up the Monitor Dell™ U2713HM Flat Panel Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing Your Cables Attaching the Soundbar AX510 / AX510.
1 . Remove the cover and place the monitor on it. 2 . Fit the two tabs on the upper part of the stand to the groove on the back of the monitor. 3 . Press the stand till it snaps into its place. Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions .
Connecting the blue VGA cable.
Connecting the black DisplayPort cable (Optional) CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary. Connecting the USB cable After you have completed connecting the DVI/VGA /DP cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: 1 .
Organizing Your Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to organize all cables as shown above.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PA only.
Removing the Stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions.
Wall Mounting (Optional) (Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA - compatible base mounting kit. 1. Place the monitor panel on a soft cloth or cushion on a stable flat table. 2. Remove the stand. 3. Use a screwdriver to remove the four screws securing the plastic cover.
Back to Contents Page Operating the Monitor Dell™ U2713HM Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu Setting the Maximum Resolution .
Shortcut key/ Preset Modes 2 Shortcut key / Brightness/Contrast Use this button to directly access the "Brightness/Contrast" menu. 3 Menu Use the MENU button to launch the on -screen display (OSD) and select the OSD Menu. See Accessing the Menu System .
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. 1. Push the button to launch the OSD menu and display the main menu.
Brightness Brightness adjusts the luminance of the backlight. Push the button to increase brightness and push the button to decrease brightness (min 0 ~ max 100). Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
NOTE: In most cases, Auto Adjust produces the best image for your configuration. NOTE: Auto Adjust option is only available when you are using the analog (VGA) connector. Input Source Use the Input Source menu to select between different video signals that may be connected to your monitor.
Input Color Format Choose the RGB option if monitor is connected to a computer or a DVD using a VGA or DVI cable. Choose the YPbPr option if monitor is connected to a DVD by a YPbPr to VGA cable or if the DVD color output setting is not RGB.
Gamma Allows you to set the color mode to PC or MAC..
Preset Modes You can choose Standard, Multimedia, Movie, Game, Text , Color Temperature, sRGB or Custom Color;.
Standard : Loads the monitor's default color settings. This is the default preset mode. Multimedia : Loads color settings ideal for multimedia applications. Movie : Loads color settings ideal for most movie applications. Game : Loads color settings ideal for most gaming applications.
sRGB : Mode to emulate 72% NTSC color. Custom Color : Allows you to manually adjust the color settings. Press the and buttons to adjust the three colors (R, G, B) values and create your own preset color mode. Hue This feature can shift color of video image to green or purple.
Reset Color Settings R eset your monitor color settings to the factory settings. Display Settings Use the Display Settings to adjust image. Aspect Ratio Adjust the image ratio as wide 16:9, 4:3 or 5:4. Horizontal Position Use the or to adjust image left or right.
NOTE: Dynamic Contrast provides higher contrast if you choose Game mode and Movie mode. Reset Display Settings Select this option to restore default display settings. Other Settings Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on.
image contains a high proportion of bright areas. When Energy Smart is On, The 'Energy Use indicator' on OSD menu should response to the changes in the screen content.
Factory Reset Reset all OSD settings to the factory preset values. Personalize User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", " Aspect Ratio", "Input Source" and set as shortcut key.
OSD Warning Messagess When Dynamic Contrast Feature is enabled (in these modes: Game and Movie), the manual brightness adjustment is disabled. When the monitor does not support a particular resolution.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 2560 x 1440. You will see the following message before the DDC/CI function is disabled.
If either VGA/DVI- D / DisplayPort/HDMI input is selected and both VGA/DVI - D / DisplayPort/HDMI cables are not connected, a floating dialog box as shown below appears.
or See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: Windows XP: 1 . Right - click on the desktop and select Properties . 2 . Select the Settings tab. 3 . Set the screen resolution to 2560 x 1440 .
If you are using a non - Dell computer (portable or desktop): Go to the support site for your computer and download the latest graphic drivers. Go to your graphics card website and download the latest graphic drivers.
Using the Tilt, Swivel, and Vertical Extension NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. Tilt , Swivel With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle.
Vertical Extension NOTE: The stand extends vertically up to 115 mm. The figures below illustrate how to extend the stand vertically..
Rotating the Monitor Before you rotate the monitor, your monitor should be fully vertically extended ( Vertical Extension ) and fully tilted ( Tilt ) up to avoid hitting the bottom edge of the monitor.
Adjusting the Rotation Display Settings of Your System After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of Your System.
Back to Contents Page Troubleshooting Dell™ U2713HM Flat Panel Monitor User's Guide Self- Test Built - in Diagnostics Common Problems Product Specific Problems Universal Serial Bus Specific Problems Dell Soundbar Problems WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions .
or or 4 . This box also appears during normal system operation if the video cable becomes disconnected or damaged. 5 . Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
To run the built - in diagnostics: 1 . Ensure that the screen is clean (no dust particles on the surface of the screen). 2 . Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self -test mode. 3 . Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds.
Ensure that the correct input source is selected via the Input Source Select button. No Video/Power LED on No picture or no brightness Increase brightness & contrast controls via OSD. Perform monitor self- test feature check. Check for bent or broken pins in the video cable connector.
Safety Related Issues Visible signs of smoke or sparks Do not perform any troubleshooting steps. Contact Dell immediately. Intermittent Problems Monitor malfunctions on & off Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
Universal Serial Bus (USB) Specific Problems Specific Symptoms What You Experience Possible Solutions USB interface is not working USB peripherals are not working Check that your monitor is turned ON. Reconnect the upstream cable to your computer. Reconnect the USB peripherals (downstream connector).
source. Set all Windows audio balance controls (L - R) to their midpoints. Clean and reseat the audio line - in plug. Troubleshoot the computer's sound card. Test the Soundbar using another audio source (i.e. portable CD player). Low Volume Volume is too low Clear any obstructions between the Soundbar and the user.
Back to Contents Page Appendix Dell™ U2713HM Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instruct.
Back to Contents Page Setting Up Your Monitor Dell™ U2713HM Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com , enter your service tag, and download the latest driver for your graphics card.
Back to Contents Page Setting Up Your Monitor Dell™ U2713HM Flat Panel Monitor If you have a non Dell™ desktop, portable computer, or graphics card In Windows XP: 1. Right - click on the desktop and click Properties . 2. Select the Settings tab. 3.
An important point after buying a device Dell U2713HMt (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell U2713HMt yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell U2713HMt - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell U2713HMt you will learn all the available features of the product, as well as information on its operation. The information that you get Dell U2713HMt will certainly help you make a decision on the purchase.
If you already are a holder of Dell U2713HMt, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell U2713HMt.
However, one of the most important roles played by the user manual is to help in solving problems with Dell U2713HMt. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell U2713HMt along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
