Instruction/ maintenance manual of the product 2408WFP Dell
Go to page of 41
Dell™2408WFPFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
Back to Contents Page AboutYourMonitor Dell™2408WFPFlatPanelMonitorUser'sGuide Product Features Identifying Parts and Controls Monitor .
Back View Backview.
Bottom View Bottom view Rightside Left side Label Description 1 Card reader. See Card Reader Specifications formoreinformation.
Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.
DVIConnector S- video Connector Composite V ideo Connector Pin Number 24 - pin Side of the Connected Signal Cable 1 TMDS RX2 - 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1 - 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.
Luma composite chroma Component Video Connector DisplayPort Connector Pin Number 3- pin Side of the C onnected Signal Cable (Cable not included) 1 Y (Luminance signal) 2 Pb (Color differen.
HDMI Connector Pin Number 19 - pin Side of the Connected Signal Cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2 - 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1 - 7 TMDS DATA 0+ 8 T.
Resolution Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hz to 75 Hz Optimal preset resolution 1920 x 1200 at 60 Hz Highest preset resolution 1920 x 1200 at 60 Hz Video.
Physical Characteristics The following table lists the physical characteristics: Connector type l D- sub: blue connector l DVI - D: white connector l DisplayPort: black connector l S- video l Composit.
Universal Serial Bus (USB) Interface USB Upstream C onnector USB Downstream C onnector Operating 5°to35°C (41°to95°F ) Nonoperating Storage:0°to 60°C .
USB P orts l 1 upstream - rear l 4 downstream - 2 on rear; 2 on left side Card Reader Specifications Overview l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card. l The Flash Memory Card Reader is automatically recognized by Windows ® 2000, XP and Vista.
General Performance Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings.
Back to Contents Page Appendix Dell™2408WFPFlatPanelMonitorUser'sGuide Safety Instructions FCC Notice (U.
FCC Class B This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio and television reception.
Back to Contents Page Setting Up Your Monitor Dell™2408WFPFlatPanelMonitor If you have a Dell ™ desktop or a Dell ™ portable computer with internet access 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™2408WFPFlatPanelMonitor If you have non Dell ™ desktop, portable computer, or graphic card 1. Right - click on the desktop and click Properties . 2. Select the Settings tab. 3. Select Advanced .
Back to Contents Page Operating the Monitor Dell™2408WFPFlatPanelMonitorUser'sGuide Using the Front Panel Controls Using the On - Scree Display (OSD) Menu .
Using the OSD Menu 1. Push the MENU button to launch the OSD menu and display the main menu. Main Menu for Analog (VGA) Input B PIP/PBP Select Use this button to activate PIP (Picture - in - Picture)/PBP (Picture - by - Picture)modesadjustment.
Or Main Menu for non Analog (non VGA) Input 2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table fora complete list of all the options available for the monitor.
Back Auto Select VGA DVI - D 1 & 2 DisplayPort HDMI Component S- Video Composite Exit Menu Push to go back to the main menu. Scan for Sources. Push to scan for available input signals. Select VGA input when you are using the analog (VGA) connector.
Back Input Color Format Gamma Color Setting mode VGA/DVI - D input Desktop Mode Multimedia Mode Game Mode sRGB Mode Warm Mode Cool Mode Custom (R, G, B) Video input Movie Mode Game Mode Sports Mode Nature Mode Hue or NOTE: Image modes are different between the VGA/DVI - D and Video inputs Push to go back to the main menu.
Saturation Exit Menu 100. makes video image shade into green ish makes video image shade into purplish NOTE: Hue adjustment only available for video input. This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color.
Display Info Display Reset Exit Menu A ll the settings related to this monitor. Reset the image to the original factory setting.
LCD Conditioning Factory Reset Exit Menu ResetallOSDsettingstothefactorypresetvalues. Push to exit the OSD main menu. PIP SETTINGS Back Mode When PIP/PBP activated PIP/PBP Source PIP Size This function brings up a window displaying image from another input source.
OSD Warning Messages PIP Position Brightness PIP /PBP Contrast PIP /PBP Hue/Tint PIP /PBP Saturation Exit Menu Select PIP window position. Use and tobrowseand to select. Adjust the brightness level of the picture in PIP /PBP Mode.
See Solving Problems for more information. Setting the Optimal Resolution 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1920 x 1200. 4. Click OK . If you do not see 1920 x 1200 as an option, you may need to update your graphics driver.
Using the Tilt, Swivel and Vertical Extension Tilt/Swivel With the built - in pedestal, you can tilt and/or swivel the monitor for the most comfortable viewing angle.
Vertical Extension Standextendsverticallyupto100mmviatheLockdown/releasebutton. .
Adjusting the Rotating Settings of Your Operating System After you have rotated your monitor, you need to complete the procedure below to rotate your operating system. 1. Right - click on the desktop and click Properties . 2. Select the Settings tab and click Advanced .
Back to Contents Page Setting Up Your Monitor Dell™2408WFPFlatPanelMonitor Important instructions to set the display resolution to 1920x1200 (Optimal) For optimal display performance while using the Microsoft Windows ® operating systems, set the display resolution to 1920 x 1200 pixels by performing the following steps: 1.
Dell™2408WFPFlatPanelMonitor Information in this document is subject to change without notice. © 2007 DellInc.Allrightsreserved. Reproduction in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™2408WFPFlatPanelMonitor User's Guide Attaching the Stand Connecting the Monitor Organizing Your Cables .
Connecting the blue VGA cable Connecting the black DisplayPort cable After you have completed connecting the DVI/VGA /DisplayPort cable, follow the procedure below to complete your monitor setup: l Plugthepowercablesforyourcomputerandmonitorintoanearbyoutlet.
Attaching the soundbar Removing the Stand Complete the following steps to remove the stand: 1. Rotate the stand to allow access to the stand release button. 2. Press and hold the stand release button. 3. Lift the stand up and away from the monitor. Back to Contents Page 1.
.
Back to Contents Page Solving Problems Dell™2408WFPFlatPanelMonitorUser'sGuide Monitor Specific Troubleshooting Common Problems Video Problems .
Video Problems l Verify that the power outlet is functioning properly using any other electrical equipment. l Ensure that the power button depressed fully . No Video/ Power LED on No picture or no brightness l Increase brightness & contrast controls via OSD.
Product Specific Problems Universal Serial Bus (USB) Specific Problems COMMON SYMPTOMS WHAT YOU EXPERIENCE POSSIBLE SOLUTIONS No Video No signal indicator is displayed l Check Vide.
TroubleshootingtheDell™Soundbar TroubleshootingtheCardReader COMMON SYMPTOMS WHAT YOU EXPERIENCE POSSIBLE SOLUTIONS No Sound No power to Soundbar - the power indicator is off.
Back to Contents Page Despite the disappearance of the pop - up window, the media has been ejected while the LED was blinking. Although the pop - up window disappears during writing, if you eject your media while the LED is still blinking, then you cannot complete your action on the media.
An important point after buying a device Dell 2408WFP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 2408WFP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 2408WFP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 2408WFP you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 2408WFP will certainly help you make a decision on the purchase.
If you already are a holder of Dell 2408WFP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 2408WFP.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 2408WFP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 2408WFP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
