Instruction/ maintenance manual of the product concept 20 Clifford
Go to page of 25
Owner' s Manua l World-Clas s Aut o Securit y T M concep t 2 0.
All Concept Series systems are covered by one or more of the following Clifford Electronics patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; .
Table of Contents Standard Features of the Concept 20 . . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . 10 How to use your keychain remote control .
Table of Contents (cont.) How to interpret the LED status indicator . . . . . . . . . . . . . . . 16 Automatic Battery-Saving Mode . . . . . . . . . . . . . . . . . . . . . . 16 AutoLock and AutoUnLock™ . . . . . . . . . . . . . . . . . . . . . 16 Remote controlled sensor adjustments .
Standard Features of the Concept 20 ✔ Lifetime Warranty —For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details).
Standard Features of the Concept 20 (cont.) ✔ Remotely Adjustable Dual-Zone Piezo Sensor™ — With just a touch on the remote, you may, at any time or place, adjust and test the sensitivity of this microprocessor-controlled solid-state sensor.
Standard Features of the Concept 20 (cont.) ✔ Remote Door Locking/Unlocking with Built-in Relays — No more fumbling with keys in the dark or bad weather! A press of a button on the remote control simultaneously arms your system and locks your vehicle’s power locks.
Standard Features of the Concept 20 (cont.) ✔ Multiple-Event TotalRecall™ — Concept 20’s memory stores the identity of the last eight triggers and/or sensors activated. This provides an invaluable diagnostic means, since, whenever you wish, the system will visually identify the activated triggers and sensors in reverse chronological order.
Standard Features of the Concept 20 (cont.) ✔ Enhanced User-Selectable AutoArming™ — Automatically arms itself “passively” if you forget. May qualify you for an insurance discount that could pay for the system (consult your insurance company).
Standard Features of the Concept 20 (cont.) ✔ High-Luminescence LED Status Indicator with Automatic Battery-Saving Mode — Adds visual deterrence and identifies system status. To conserve vehicle battery power, if the system has remained continuously armed for 48 hours, the flash rate will automatically slow to half the normal rate.
Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Concept 20 vehicle security/convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories.
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system.
What each button/channel does Your Concept 20 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel except 9 through 12 to any function (see pages 20-24).
TO ACTIVATE THE PANIC FEATURE . . . . . . . . . . Press button 1 (channel 1) for 3 seconds. The parking lights will flash repeatedly and the siren will blare for 30 or 60 seconds (user-selectable), or until you press button 1 again to turn it off.
Anti-CodeGrabbing™ (ACG) with Random Code Encryption A Clifford exclusive that protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers are far more effective and efficient than scanning.
UltraSecure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system.
To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode.
Press button 1 again and the doors lock (confirmed by two flashes). You can also use the other channels to activate options such as a remote trunk release or remote engine starting. FACT™— False Alarm Control and Test With FACT, you’ll never experience repeated false alarms.
AutoLock and AutoUnLock™ For your safety and that of your passengers, the doors automatically lock the instant you turn on the ignition (see User-selectable features on pages 20-24). When you turn the ignition off, AutoUnLock automatically unlocks the doors.
have factory-delayed courtesy lights). If a sensor is malfunctioning, you will receive the usual 2 chirps and 2 flashes, then, 10 seconds later, there will be 4 chirps and 4 flashes. NOTE: Since this is a warning indication, you will hear the 4 chirps even if you have the chirp muting feature turned on.
High-output Insignia™ Siren All the siren electronics are in the system control unit rather than the siren itself. This protects them from heat, dirt and exposure to the elements (other alarm companies’ sirens are far more susceptible to failure).
User-selectable features Your Concept 20 allows you to set many of its features to your own personal preferences. Although the system’s programming capabilities are very extensive, we have made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times.
c. To exit program mode, turn the ignition off (you’ll hear 3 chirps and the LED will turn off to indicate exit of program mode). If driving, just wait 60 seconds and the system will automatically exit program mode.
Therefore, you can go right away to the row selection (momentary side of the switch). Now, within 10 seconds, press the momentary side two times to jump to row 2. After a brief pause, you’ll hear 1 chirp to confirm that AutoUnLock is now off. 4. Now look up the location on the table of siren duration.
Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Row 1 1st momentary Add new remote to channel 1 info on.
An important point after buying a device Clifford concept 20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford concept 20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford concept 20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford concept 20 you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford concept 20 will certainly help you make a decision on the purchase.
If you already are a holder of Clifford concept 20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford concept 20.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford concept 20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford concept 20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
