Instruction/ maintenance manual of the product ACE 300 Clifford
Go to page of 16
World-Clas s Aut o Securit y T M.
Table of Contents Standard Features of the ACE 300 . . . . . . . . . . . . . . . . . . . 3 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . 6 How to use your keychain remote control . . . . . . . . . . . . . . . . 6 What each button/channel does .
Table of Contents (cont.) Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Specific malfunction identification . . . . . . . . . . . . . . . . . . . . . 11 Automatic malfunction bypass . . . . . . . . . . . . . . . . . . . .
Standard Features of the ACE 300 ✔ Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details).
Standard Features of the ACE 300 (cont.) ✔ Remote Controlled Courtesy Lighting — For your personal safety and convenience, when you remotely disarm your ACE 300, the interior lights turn on and stay on until you start the engine or 30 seconds, whichever occurs first.
Standard Features of the ACE 300 (cont.) ✔ TotalRecall™ — ACE 300’s memory stores the identity of the last trigger or sensor activated. This provides an invaluable diagnostic means, since, whenever you wish, the system will visually identify the last activated trigger or senso r .
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 100 feet. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system.
What each button/channel does Your ACE 300 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 13-14). The following chart indicates what each remote control channel number does, and how to transmit each channel number.
TO ACTIVATE THE PANIC FEATURE . . . . . . . . . . Press button 1 (channel 1) for 3 seconds. The parking lights will flash repeatedly and the siren will blare for 30 seconds or until you press button 1 again to turn it off. If the ignition is on (indicating you are in the car), the doors will automatically lock to prevent an assailant from entering.
Enhanced AutoArming™ If this feature is enabled and you forget to remotely arm, ACE 300 automatically arms itself 30 seconds after the doors are closed. For your convenience, if you re-open any door(s) within the 30-second countdown, AutoArming will restart from the beginning once all doors are closed.
How to interpret the chirps and parking light flashes When you use the remote control, the system responds with chirps and parking light flashes. These chirp/flash acknowledgments mean: Selectable starter/ignition interrupt At the time of installation, you can select whether your ACE 300 interrupts the starter line or the ignition line.
Smart AutoTesting™ Each time you remotely arm your ACE 300, it automatically performs an extensive test of all system triggers and sensors. If the hood or trunk is open when you remotely arm, the sy.
Smart prior intrusion attempt alert If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you enter the vehicle and turn on the ignition (or start the engine), the LED will blink 1–3 times, pause, then repeat the blink cycle 4 more times.
User-selectable features Your ACE 300 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times.
Feature Factory setting # of flicks & chirps Secondary action Program completion confirmation Result Add a new remote to channel 3 (silent arm/disarm) — 15 Press remote control button 3 3 chirps.
How to erase the codes of lost or stolen remote controls If one of your remote controls is ever lost or stolen, you can erase its digital codes from the system memory to make sure that the missing remote control can never be used to disarm your system.
An important point after buying a device Clifford ACE 300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford ACE 300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford ACE 300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford ACE 300 you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford ACE 300 will certainly help you make a decision on the purchase.
If you already are a holder of Clifford ACE 300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford ACE 300.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford ACE 300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford ACE 300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
