Instruction/ maintenance manual of the product ST-4000RGB Chauvet
Go to page of 16
LED Techno Strobe RGB™ ST-4000RGB USER MANUAL CHAUVET, 3000 N 29 th Ct, Hollywood, FL 33020 U .S.A (800) 762-1084 – (954) 929 -1115 FAX (954) 929-5560 www.
T able of Contents T able of Contents 1. BEFORE YOU BEGIN ........................................................................................................... ............................................ 3 U NPACKING I NSTRUCTIONS .............
1. Before Y ou Begin Unpacking Instructions Immediately upon receiving a product, carefully unpa ck the carton, check the contents to ensure that all parts are present, and have been received in good condition.
Before You Begin Important Safety Information This product is designed for profe ssional use. It is not intended fo r use in a househo ld environment. This product presents risks of lethal or severe injury due to fire and heat, electric shock, ultraviolet radiation, lamp explosion, and injury from falls.
2. Introduction Features • 6-channel DMX-512 LED strobe system • Blackout and static / strobing • Built-in automatic programs • Built-in sound programs • Dimming • RGB color mixing with or.
Introduction Product Overview Hanging Yoke Audio Sens itiv ity Rotary knob DIP-switch es DMX Addressing DMX In p ut DMX Out p ut ST-4000RGB User Manual 6 2008-11-07 / 11:37 IEC Plug for AC Input &.
3. Setup AC Power Warning! Verify that the power re quirement label on y our unit matche s the line voltage applied. All fixture s must be connected to circuits with a s uitable Earth Ground.
Setup Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixt ures set to a master/slave operating mode.
Setup 3-Pin to 5-Pin Conversion Chart 3-Pin to 5-Pin Conversion Chart Note! If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter.
4. Operating Instructions The ST-4000RGB™ is a DMX-512 controllable, fu ll RGB color mix LED panel made up of highly efficient and super bright LEDs. The ST-4000R GB™ can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 5 channels.
Operating Instructions DMX Control Mode The ST-4000RGB™ can be operated from a DMX cont roller. This control mode environment gives the user the greatest flexibility when it comes to customizing or creating a show by enabling the control of each individual trait of the fixture and each fixture indepen dently.
5. Appendix DMX Primer There are 512 channels in a DMX-512 connection. Channels may be assigned in any manner. A fixture capable of receiving DMX-512 will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates the first channel reserved in the controller.
Appendix Unplug fixture from power. Use a vacuum or air co mpressor and a soft brush to remove dust collected on external vents and internal components. Clean all glass when the fixture is cold with a mild solution of glass cleaner or Isopropyl Alcohol a nd a soft lint free cotton cloth or lens tissue.
Appendix Binary Addressing Quick Reference Chart DMX & Binary Address Quick Reference Chart DIP-switch Position DMX DIP-SWITCH SET #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0=OFF #8 0 0 0 0 1 1 1 1 0 0 0.
Appendix DMX Channel Values NOTE! Please read all instructions car efully on fixture DMX con trol mode and addres sing. DMX channels 2, 3, 4 and 5 functions are determi ned by the current settings of channel 1.
Appendix ST-4000RGB User Manual 16 2008-11-07 / 11:37 Technical Specifications WEIGHT & DIMENSIONS Length........................................................................................................................ 355.6 mm (14.0 in) Width .
An important point after buying a device Chauvet ST-4000RGB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chauvet ST-4000RGB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chauvet ST-4000RGB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chauvet ST-4000RGB you will learn all the available features of the product, as well as information on its operation. The information that you get Chauvet ST-4000RGB will certainly help you make a decision on the purchase.
If you already are a holder of Chauvet ST-4000RGB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chauvet ST-4000RGB.
However, one of the most important roles played by the user manual is to help in solving problems with Chauvet ST-4000RGB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chauvet ST-4000RGB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
