Instruction/ maintenance manual of the product LSA02W Haier
Go to page of 2
Door Alignment (see fig. # 1) 1. Remove the top hinge cover by using a flathead screwdriver . Place the head under the front edge of the cap and gently lift. 2. Loosen the top hinge screws using a Phillips head screw driver . 3. Adjust the door or put a spacer in between and tighten the screws.
IMPORT ANTE No regrese este producto a la tienda Si tiene algún problema con este producto, por favor contacte el "Centr o de Servicio al Consumidor de " al 1-877- 337-3639 (Válido solo en E.
An important point after buying a device Haier LSA02W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier LSA02W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier LSA02W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier LSA02W you will learn all the available features of the product, as well as information on its operation. The information that you get Haier LSA02W will certainly help you make a decision on the purchase.
If you already are a holder of Haier LSA02W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier LSA02W.
However, one of the most important roles played by the user manual is to help in solving problems with Haier LSA02W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier LSA02W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
